The IBM/LINUX version of PREPRO2002 comes with

executable codes, in compressed form.

 

1) To uncompress and install, copy INSTALL.BAT and

   PREPROZ.Z to your hard drive. Execute INSTALL.BAT -

   WARNING - DO NOT execute PREPROZ.Z, or the system

   will not properly install into a directory structure.

   After installation you can delete PREPROZ.Z and

   INSTALL.BAT.

 

2) To VERIFY proper installation, it is recommended

   that after installation you execute VERIFY. This

   is a batch file that will run the codes in sequence.

 

   The final two codes will display the calculated

   cross sections (EVALPLOT), and compare the results

   you calculated to a standard set of results (COMPLOT).

   Difference of about 1 % are acceptable; larger

   differences indicate an installation problem.

 

   If the codes EVALPLOT and COMPLOT fail to execute then

   you may need to recompile them and change the path in the

   Makefile (LINUX.MAK)to the directory that contains your

   X-Windows routines. i.e. /usr/lib/X11. In this case you

   will need the FORTRAN source codes that are contained in

   the UNIX distribution.

 

3) If you have any problems notify the Nuclear Data

   Section, IAEA, Vienna, Austria.

 

   services@iaeand.iaea.or.at