======================================================================= Activate
Activate
PROGRAM ACTIVATE Activate
================ Activate
VERS. 2000-1 (APRIL 2000) *INITIAL VERSION. Activate
VERS. 2002-1 (MAY 2002) *OPTIONAL INPUT PARAMETERS Activate
VERS. 2004-1 (JAN. 2004) *CORRECTED ERROR - FIRST RECORD AFTER Activate
MF=10 WAS MISSING. Activate
*ADDED INCLUDE TO DEFINE COMMON Activate
*INCREASED MAX. POINTS FROM 100,000 Activate
TO 1,000,000. Activate
VERS. 2007-1 (JAN. 2007) *CHECKED AGAINST ALL ENDF/B-VII Activate
VERS. 2007-2 (DEC. 2007) *72 CHARACTER FILE NAMES. Activate
VERS. 2010-1 (Apr. 2010) *General update based on user feedback Activate
VERS. 2012-1 (Aug. 2012) *Added CODENAME Activate
*Added ERROR stop Activate
*32 and 64 bit Compatible Activate
VERS. 2015-1 (Jan. 2015) *Corrected ERROR for missing or extra Activate
SEND and MEND lines. Activate
*Changed MF=8 pointer from MF=9 to 10. Activate
*INCREASED MAX. POINTS to 3,000,000. Activate
*Added Consistency checks, e.g., Activate
Any MT in MF=9 requires data in MF=3. Activate
*Extended OUT9 - OUT10 is not used. Activate
*Only processes ONE ENDF Tape - this Activate
restriction is necessary to insure Activate
compatibility with ALL PREPRO codes. Activate
*Changed to current ENDF sequence Activate
number convention, e.g., reset number Activate
for each section (MAT/MF/MT). Activate
*Replaced ALL 3 way IF statements. Activate
VERS. 2017-1 (May 2017) *Increased MAX. POINTS to 6,000,000. Activate
*Do not create MF=10 for any MT that Activate
already has MF=10 data = copy MF=10 Activate
data in its original form. Activate
*Message for every MF=7 output, Activate
whether created or copied from input. Activate
*Updated based on user feedback. Activate
Activate
Acknowledgement 2015 Activate
-------------------- Activate
Currently almost all improvements to this code are based upon Activate
feedback from code users who report problems. This feedback Activate
benefits ALL users of this code, and ALL users are encouraged Activate
to report problems. Activate
Activate
Improvements on the 2015 version of this code based on user Activate
feedback, including IMPORTANT feedback from Andrej Trkov, up Activate
to and including Feb. 2015. Activate
Activate
OWNED, MAINTAINED AND DISTRIBUTED BY Activate
------------------------------------ Activate
THE NUCLEAR DATA SECTION Activate
INTERNATIONAL ATOMIC ENERGY AGENCY Activate
P.O. BOX 100 Activate
A-1400, VIENNA, AUSTRIA Activate
EUROPE Activate
Activate
ORIGINALLY WRITTEN BY Activate
------------------------------------ Activate
Dermott E. Cullen Activate
Activate
PRESENT CONTACT INFORMATION Activate
--------------------------- Activate
Dermott E. Cullen Activate
1466 Hudson Way Activate
Livermore, CA 94550 Activate
U.S.A. Activate
Telephone 925-443-1911 Activate
E. Mail RedCullen1@Comcast.net Activate
Website RedCullen1.net/HOMEPAGE.NEW Activate
Activate
Activate
AUTHORS MESSAGE Activate
--------------- Activate
THE REPORT DESCRIBED ABOVE IS THE LATEST PUBLISHED DOCUMENTATION Activate
FOR THIS PROGRAM. HOWEVER, THE COMMENTS BELOW SHOULD BE CONSIDERED Activate
THE LATEST DOCUMENTATION INCLUDING ALL RECENT IMPROVEMENTS. PLEASE Activate
READ ALL OF THESE COMMENTS BEFORE IMPLEMENTATION. Activate
Activate
AT THE PRESENT TIME WE ARE ATTEMPTING TO DEVELOP A SET OF COMPUTER Activate
INDEPENDENT PROGRAMS THAT CAN EASILY BE IMPLEMENTED ON ANY ONE Activate
OF A WIDE VARIETY OF COMPUTERS. IN ORDER TO ASSIST IN THIS PROJECT Activate
IT WOULD BE APPECIATED IF YOU WOULD NOTIFY THE AUTHOR OF ANY Activate
COMPILER DIAGNOSTICS, OPERATING PROBLEMS OR SUGGESTIONS ON HOW TO Activate
IMPROVE THIS PROGRAM. HOPEFULLY, IN THIS WAY FUTURE VERSIONS OF Activate
THIS PROGRAM WILL BE COMPLETELY COMPATIBLE FOR USE ON YOUR Activate
COMPUTER. Activate
Activate
PURPOSE Activate
------- Activate
THIS PROGRAM IS DESIGNED TO CREATE FILE 10 ACTIVATION CROSS Activate
SECTIONS BY COMBINING FILE 3 CROSS SECTIONS AND FILE 9 MULTIPLIERS Activate
Activate
IN THE FOLLOWING DISCUSSION FOR SIMPLICITY THE ENDF TERMINOLOGY Activate
---ENDF TAPE---WILL BE USED. IN FACT THE ACTUAL MEDIUM MAY BE Activate
TAPE, CARDS, DISK OR ANY OTHER MEDIUM. Activate
Activate
ASSUMPTIONS Activate
----------- Activate
IT IS ASSUMED THAT THE FILE 3 AND 9 DATA HAVE BEEN LINEARIZED Activate
BEFORE THIS CODE IS USED - FILE 3 AND 9 DATA CAN BE LINEARIZED Activate
USING PROGRAM LINEAR. Activate
Activate
IT IS ASSUMED THAT THE FILE 9 MULTIPLIERS ARE FAIRLY SMOOTH VERSUS Activate
ENERGY, AND THAT THE ACTIVATION CROSS SECTIONS FOR FILE 10 CAN BE Activate
DEFINED AT EXACTLY THE SAME ENERGIES AS THE FILE 3 CROSS SECTIONS, Activate
AND THAT THESE NEED MERELY BE MULTIPLIED BY THE FILE 9 TO DEFINE Activate
THE FILE 10 ACTIVATION CROSS SECTIONS. Activate
Activate
ENDF FORMAT Activate
----------- Activate
THIS PROGRAM ONLY USES THE ENDF BCD OR CARD IMAGE FORMAT (AS Activate
OPPOSED TO THE BINARY FORMAT) AND CAN HANDLE DATA IN ANY VERSION Activate
OF THE ENDF FORMAT (I.E., ENDF-1, 2, 3, 4, 5 OR 6 FORMAT). Activate
Activate
IT IS ASSUMED THAT THE DATA IS CORRECTLY CODED IN THE ENDF Activate
FORMAT AND NO ERROR CHECKING IS PERFORMED. IN PARTICULAR IT IS Activate
ASSUMED THAT THE MAT, MF AND MT ON EACH LINE IS CORRECT. SEQUENCE Activate
NUMBERS (COLUMNS 76-80) ARE IGNORED ON INPUT, BUT WILL BE Activate
CORRECTLY OUTPUT ON ALL LINES. THE FORMAT OF SECTION MF=1, MT=451 Activate
AND ALL SECTIONS OF MF=3 MUST BE CORRECT. THE PROGRAM COPIES ALL Activate
OTHER SECTION OF DATA AS HOLLERITH AND AS SUCH IS INSENSITIVE TO Activate
THE CORRECTNESS OR INCORRECTNESS OF ALL OTHER SECTIONS. Activate
Activate
OUTPUT FORMAT Activate
------------- Activate
ALL ENERGIES WILL BE OUTPUT IN F (INSTEAD OF E) FORMAT IN ORDER Activate
TO ALLOW ENERGIES TO BE WRITTEN WITH UP TO 9 DIGITS OF ACCURACY. Activate
COMPARISON OF THE NORMAL ENDF CONVENTION OF 6 DIGITS TO THE 9 Activate
DIGIT OUTPUT FROM THIS PROGRAM DEMONSTRATED THAT FAILURE TO USE Activate
THE 9 DIGIT OUTPUT CAN LEAD TO LARGE ERRORS IN THE DATA DUE TO Activate
TRUNCATION OF ENERGIES TO 6 DIGITS DURING OUTPUT. Activate
Activate
CONTENTS OF OUTPUT Activate
------------------ Activate
ENTIRE EVALUATIONS ARE OUTPUT, NOT JUST THE PROCESSED DATA, E.G., Activate
ANGULAR AND ENERGY DISTRIBUTIONS ARE ALSO INCLUDED. Activate
Activate
DOCUMENTATION Activate
------------- Activate
THE FACT THAT THIS PROGRAM HAS OPERATED ON THE DATA IS DOCUMENTED Activate
BY THE ADDITION OF 3 COMMENT LINES AT THE END OF EACH HOLLERITH Activate
SECTION IN THE FORM Activate
Activate
***************** PROGRAM ACTIVATE (2017-1) **************** Activate
FILE 10 ACTIVATION CROSS SECTIONS HAVE BEEN DEFINED BY COMBINING Activate
FILE 3 CROSS SECTIONS AND FILE 9 MULTIPLIERS. FILE 9 DELETED. Activate
Activate
THE ORDER OF SIMILAR COMMENTS (FROM RECENT, SIGMA1 AND GROUPIE) Activate
REPRESENTS A COMPLETE HISTORY OF ALL OPERATIONS PERFORMED ON Activate
THE DATA BY THESE PROGRAMS. Activate
Activate
THESE COMMENT LINES ARE ONLY ADDED TO EXISTING HOLLERITH SECTIONS, Activate
I.E., THIS PROGRAM WILL NOT CREATE A HOLLERITH SECTION. THE FORMAT Activate
OF THE HOLLERITH SECTION IN ENDF-5 DIFFERS FROM THE THAT OF Activate
EARLIER VERSIONS OF ENDF. BY READING AN EXISTING MF=1, MT=451 Activate
IT IS POSSIBLE FOR THIS PROGRAM TO DETERMINE WHICH VERSION OF Activate
THE ENDF FORMAT THE DATA IS IN. WITHOUT HAVING A SECTION OF Activate
MF=1, MT=451 PRESENT IT IS IMPOSSIBLE FOR THIS PROGRAM TO Activate
DETERMINE WHICH VERSION OF THE ENDF FORMAT THE DATA IS IN, AND Activate
AS SUCH IT IS IMPOSSIBLE FOR THE PROGRAM TO DETERMINE WHAT FORMAT Activate
SHOULD BE USED TO CREATE A HOLLERITH SECTION. Activate
Activate
REACTION INDEX Activate
-------------- Activate
THIS PROGRAM DOES NOT USE THE REACTION INDEX WHICH IS GIVEN IN Activate
SECTION MF=1, MT=451 OF EACH EVALUATION. Activate
Activate
THIS PROGRAM DOES NOT UPDATE THE REACTION INDEX IN MF=1, MT=451. Activate
THIS CONVENTION HAS BEEN ADOPTED BECAUSE MOST USERS DO NOT Activate
REQUIRE A CORRECT REACTION INDEX FOR THEIR APPLICATIONS AND IT WAS Activate
NOT CONSIDERED WORTHWHILE TO INCLUDE THE OVERHEAD OF CONSTRUCTING Activate
A CORRECT REACTION INDEX IN THIS PROGRAM. HOWEVER, IF YOU REQUIRE Activate
A REACTION INDEX FOR YOUR APPLICATIONS, AFTER RUNNING THIS PROGRAM Activate
YOU MAY USE PROGRAM DICTIN TO CREATE A CORRECT REACTION INDEX. Activate
Activate
SECTION SIZE Activate
------------ Activate
SECTIONS OF MF=9 MULTIPLIERS ARE LIMITED TO A MAXIMUM OF 3,000,000 Activate
ENERGY POINTS. Activate
Activate
THERE IS NO LIMIT ON THE NUMBER OF ENERGY POINTS IN MF=3 AND 10 Activate
TABLES = THIS DATA IS READ AS CHARACTERS, ONE LINE AT A TIME. Activate
Activate
SELECTION OF DATA Activate
----------------- Activate
THE PROGRAM PROCESSES ALL ENDF DATA ON ONE ENDF TAPE. Activate
Activate
2015 - IT NOW ONLY DOES ONE ENDF TAPE. Activate
Activate
PROGRAM OPERATION Activate
----------------- Activate
PASS #1 Activate
------- Activate
THE ENTIRE MAT IS COPIED TO A SCRATCH FILE IN THE ENDF ASCII Activate
FORMAT AND WHILE COPYING IT TO SCRATCH MF=3, 9, AND 10 ARE ALSO Activate
COPIED TO SEPERATE SCRATCH FILES, I.E., THERE ARE A TOTAL OF 4 Activate
SCRATCH FILES - SEE THEIR DEFINITIONS BELOW. Activate
Activate
PASS #2 Activate
------- Activate
IF NO MF=9 MULTIPLIERS ARE FOUND DURING PASS #1, THE ENTIRE MAT Activate
IS COPIED FROM SCRATCH TO THE OUTPUT FILE, WITHOUT ANY CHECKS. Activate
Activate
IF MF=9 MULTIPLIERS ARE FOUND THEY ARE USED WITH MF=3 CROSS Activate
SECTIONS TO CREATE MF=10 ACTIVATION CROSS SECTIONS. Activate
Activate
FOR ANY SECTION OF MF=10 DATA FOR WHICH NO MF=9 MULTIPLIERS ARE Activate
FOUND, THE ORIGINAL MF=10 IS OUTPUT. Activate
Activate
FOR CONSISTENCY ALL MF=9 MULTIPLIERS ARE DELETED, I.E., THEY ARE Activate
NOT INCLUDED IN THE OUTPUT. Activate
Activate
KEEP EVALUATED DATA POINTS Activate
-------------------------- Activate
THE FILE 10 OUTPUT WILL BE AT EXACTLY THE SAME ENERGY POINTS AS Activate
THE FILE 3 CROSS SECTIONS USED TO DEFINE THE FILE 10 ACTIVATION Activate
CROSS SECTIONS. Activate
Activate
INPUT FILES Activate
----------- Activate
UNIT DESCRIPTION Activate
---- ----------- Activate
2 INPUT LINES (BCD - 80 CHARACTERS/RECORD) Activate
10 ORIGINAL ENDF DATA (BCD - 80 CHARACTERS/RECORD) Activate
Activate
OUTPUT FILES Activate
------------ Activate
UNIT DESCRIPTION Activate
---- ----------- Activate
3 OUTPUT REPORT (BCD - 120 CHARACTERS/RECORD) Activate
11 FINAL ENDF DATA (BCD - 80 CHARACTERS/RECORD) Activate
Activate
SCRATCH FILES Activate
------------- Activate
UNIT DESCRIPTION Activate
---- ----------- Activate
12 SCRATCH FILE FOR ALL MAT (BCD - 80 CHARACTERS/RECORD) Activate
14 SCRATCH FILE FOR MF=3 DATA (BCD - 80 CHARACTERS/RECORD) Activate
15 SCRATCH FILE FOR MF=9 DATA (BCD - 80 CHARACTERS/RECORD) Activate
16 SCRATCH FILE FOR MF=10 DATA (BCD - 80 CHARACTERS/RECORD) Activate
Activate
OPTIONAL STANDARD FILE NAMES (SEE SUBROUTINE FILEIO) Activate
---------------------------------------------------- Activate
UNIT FILE NAME Activate
---- ---------- Activate
2 ACTIVATE.INP Activate
3 ACTIVATE.LST Activate
10 ENDFB.IN Activate
11 ENDFB.OUT Activate
12 (SCRATCH) Activate
14 (SCRATCH) Activate
15 (SCRATCH) Activate
Activate
INPUT PARAMETERS Activate
---------------- Activate
Activate
LINE COLS. DESCRIPTION Activate
---- ----- ----------- Activate
1 1-72 ENDF INPUT DATA FILENAME Activate
(STANDARD OPTION = ENDFB.IN) Activate
2 1-72 ENDF OUTPUT DATA FILENAME Activate
(STANDARD OPTION = ENDFB.OUT) Activate
Activate
ONE PAIR OF INPUT LINES MAY BE USED, TO PROCESS ANY ENDF TAPE. Activate
Activate
2015 - NOW ONLY DOES ONE ENDF TAPE. Activate
Activate
EXAMPLE INPUT NO. 1 Activate
------------------- Activate
PROCESS ENDF TAPE NAMED ACTIVATE.IN AND NAME THE OUTPUT FILE Activate
ACTIVATE.OUT. Activate
Activate
IN THIS CASE THE FOLLOWING 2 INPUT LINES ARE REQUIRED Activate
Activate
ACTIVATE.IN Activate
ACTIVATE.OUT Activate
Activate
EXAMPLE INPUT NO. 2 Activate
------------------- Activate
SAME AS THE ABOVE CASE, EXCEPT THAT IN THIS CASE THE ORIGINAL Activate
TAPE IS IN A DIRECTORY NAMED \ENDFB6\ORIGINAL, AND THE Activate
RESULTS WILL BE WRITTEN INTO A DIRECTORY NAMED \ENDFB6\ACTIVATE. Activate
Activate
IN THIS CASE THE FOLLOWING 6 INPUT LINES ARE REQUIRED Activate
Activate
\ENDFB6\ORIGINAL\ACTIVATE.IN Activate
\ENDFB6\ACTIVATE\ACTIVATE.OUT Activate
Activate
EXAMPLE INPUT NO. 3 Activate
------------------- Activate
IF THERE IS NO ACTIVATE.INP FILE, OR THE FILENAMES ARE BLANK Activate
THIS CODE WILL USE THE DEFAULT NAMES, Activate
Activate
ENDFB.IN Activate
ENDFB.OUT Activate
Activate
======================================================================= Activate