======================================================================= Evalplot
Evalplot
PROGRAM EVALPLOT Evalplot
================ Evalplot
VERSION 75-1 (AUGUST 1975) Evalplot
VERSION 76-1 (JULY 1976) Evalplot
VERSION 77-1 (APRIL 1977) Evalplot
VERSION 78-1 (JULY 1978) Evalplot
VERSION 79-1 (FEBRUARY 1979) Evalplot
VERSION 80-1 (JULY 1980) *IBM VERSION Evalplot
VERSION 80-2 (DECEMBER 1980) Evalplot
VERSION 81-1 (MARCH 1981) Evalplot
VERSION 81-2 (AUGUST 1981) *IMPROVED ZOOM CAPABILITY Evalplot
VERSION 82-1 (JANUARY 1982) *IMPROVED COMPUTER COMPATIBILITY Evalplot
VERSION 83-1 (JANUARY 1983) *ELIMINATED COMPUTER DEPENDENT CODING. Evalplot
VERSION 83-2 (OCTOBER 1983) *ADDED PLOTTING OF HISTOGRAM DATA. Evalplot
VERSION 84-1 (DECEMBER 1984)*ADDED PLOTS OF LEGENDRE COEFFICENTS Evalplot
AS A FUNCTION OF ENERGY. Evalplot
*ADDED SMALL PLOTTING MODE. Evalplot
VERSION 85-1 (AUGUST 1985) *FORTRAN-77/H VERSION Evalplot
VERSION 86-1 (JANUARY 1986) *ENDF/B-VI FORMAT Evalplot
VERSION 88-1 (JULY 1988) *MAJOR REVISION TO MAKE CODE EASILY Evalplot
INTERFACEABLE TO ALMOST ANY PLOTTER. Evalplot
*WARNING...INPUT PARAMETERS FROM BEEN Evalplot
CHANGED (SEE, DESCRIPTION BELOW) Evalplot
*COMPUTER INDEPENDENT SOFTWARE Evalplot
CHARACTERS. Evalplot
*COLOR PLOTS. Evalplot
*MT NUMBER DEFINITIONS FROM DATA FILE Evalplot
READ BY PROGRAM Evalplot
*FORTRAN-77 REQUIRED (FORTRAN-H NO Evalplot
SUPPORTED BY THIS PROGRAM). Evalplot
*OPTION...INTERNALLY DEFINE ALL I/O Evalplot
FILE NAMES (SEE, SUBROUTINE FILEIO Evalplot
FOR DETAILS). Evalplot
*IMPROVED BASED ON USER COMMENTS. Evalplot
VERSION 89-1 (JANUARY 1989) *PSYCHOANALYZED BY PROGRAM FREUD TO Evalplot
INSURE PROGRAM WILL NOT DO ANYTHING Evalplot
CRAZY. Evalplot
*UPDATED TO USE NEW PROGRAM CONVERT Evalplot
KEYWORDS. Evalplot
*ADDED LIVERMORE CIVIC COMPILER Evalplot
CONVENTIONS. Evalplot
*FORTRAN-77/FORTRAN-H COMPATIBLE Evalplot
*SPECIAL ENDF/B MATERIAL DEFINITIONS Evalplot
(ZA.LT.1000) FROM DATA FILE READ Evalplot
BY PROGRAM. Evalplot
VERSION 89-2 (MARCH 1989) *ADDED ENDF/B-V AND VI MT Evalplot
DEFINITIONS. PROGRAM WILL DETERMINE Evalplot
ENDF/B FORMAT BASED ON MF=1, Evalplot
MT=451 AND USE ASPPROPRIATE MT Evalplot
DEFINITIONS. IF NO MF=1, MT=451 Evalplot
PROGRAM WILL USE ENDF/B-V Evalplot
MT DEFINITIONS. Evalplot
VERSION 89-3 (JUNE 1989) *3 CHARACTER FONTS Evalplot
VERSION 92-1 (JANUARY 1992) *COMPLETE REWRITE OF CODE Evalplot
*ADDED PHOTON DATA, MF=23 AND 27 Evalplot
*ADDED INCIDENT CHARGED PARTICLES Evalplot
(IDENTIFIED IN PLOT TITLES) Evalplot
*ADDED FORTRAN SAVE OPTION. Evalplot
*UPDATED BASED ON USER COMMENTS Evalplot
*ADDED RETRIEVAL BY UP TO 100 Evalplot
MAT/MF/MT OR ZA/MF/MT RANGES Evalplot
*WARNING...INPUT PARAMETER FORMAT Evalplot
HAS BEEN CHANGED...SEE DESCRIPTION Evalplot
BELOW. Evalplot
VERSION 92-2 (FEBRUARY 1992)*ADDED PHOTON SPECTRA, MF=15. Evalplot
*ADDED MULTIPLICATION OF DISTRIBUTIONS Evalplot
IN MF=5 AND 15 BY PROBABILITY=YIELD. Evalplot
*INCREASED PAGE SIZE TO 12000 POINTS Evalplot
VERSION 92-3 (MAY 1992) *CORRECTED DESCRIPTION OF INPUT Evalplot
PARAMETERS AND EXAMPLE PROBLEMS. Evalplot
*CORRECTED FOR ENDF/B-VI DEFINITION OF Evalplot
TEMPERATURE FROM MF=1/MT=451. Evalplot
*CORRECTED LOGIC SO THAT EACH REQUEST Evalplot
IS TREATED SEPARATELY TO CREATE A Evalplot
PLOT, UNLESS REQUESTS ARE CHAINED Evalplot
TOGETHER. Evalplot
*ADDED VARIABLE CHARACTER SIZE INPUT. Evalplot
VERSION 93-1 (MARCH 1993) *INCREASED PAGE SIZE FROM 12000 Evalplot
TO 210000 Evalplot
*INCREASED THE NUMBER OF ENERGIES Evalplot
VS. LEGENDRE COEFFICIENTS FROM Evalplot
167 TO 7000 Evalplot
*UPDATED FOR ON SCREEN GRAPHICS Evalplot
USING THE LAHEY FORTRAN COMPILER. Evalplot
VERSION 94-1 (JANUARY 1994) *VARIABLE ENDF/B DATA FILENAMES Evalplot
TO ALLOW ACCESS TO FILE STRUCTURES Evalplot
(WARNING - INPUT PARAMETER FORMAT Evalplot
HAS BEEN CHANGED) Evalplot
*CLOSE ALL FILES BEFORE TERMINATING Evalplot
(SEE, SUBROUTINE ENDIT) Evalplot
VERSION 96-1 (JANUARY 1996) *COMPLETE RE-WRITE Evalplot
*IMPROVED COMPUTER INDEPENDENCE Evalplot
*ALL DOUBLE PRECISION Evalplot
*UNIFORM TREATMENT OF ENDF/B I/O Evalplot
*IMPROVED OUTPUT PRECISION Evalplot
*DEFINED SCRATCH FILE NAMES Evalplot
*ALL DOUBLE PRECISION Evalplot
VERSION 97-1 (APRIL 1997) *INCREASED PAGE SIZE FROM 210000 Evalplot
TO 480,000 Evalplot
VERSION 99-1 (MARCH 1999) *CORRECTED CHARACTER TO FLOATING Evalplot
POINT READ FOR MORE DIGITS Evalplot
*UPDATED TEST FOR ENDF/B FORMAT Evalplot
VERSION BASED ON RECENT FORMAT CHANGE Evalplot
*GENERAL IMPROVEMENTS BASED ON Evalplot
USER FEEDBACK Evalplot
VERS. 2000-1 (FEBRUARY 2000)*ADDED MF=10, ACTIVATION CROSS Evalplot
SECTION PLOTS. Evalplot
*INCREASED DIMENSIONS TO HANDLE MORE Evalplot
SECTIONS - UP TO 1,000 Evalplot
*GENERAL IMPROVEMENTS BASED ON Evalplot
USER FEEDBACK Evalplot
VERS. 2002-1 (Nov. 2002) *OPTIONAL INPUT PARAMETERTS Evalplot
*OPTIONAL BLACK OR WHITE BACKGROUND Evalplot
*COLOR POSTSCRIPT FILES Evalplot
VERS. 2004-1 (MARCH 2004) *ADDED INCLUDE FOR COMMON Evalplot
*INCREASED PAGE SIZE TO 600,000 Evalplot
*INCREASED THE NUMBER OF ENERGIES Evalplot
VS. LEGENDRE COEFFICIENTS FROM Evalplot
7000 TO 20000 Evalplot
VERS. 2007-1 (JAN. 2007) *CHECKED AGAINST ALL ENDF/B-VII. Evalplot
*INCREASED PAGE SIZE TO 2,400,000 Evalplot
FROM 600,000. Evalplot
VS. LEGENDRE COEFFICIENTS TO Evalplot
80,000 FROM 20,000 (MUST BE 1/30 Evalplot
PAGE SIZE). Evalplot
*ADDED (N,REMAINDER) TO FIRST PLOT. Evalplot
VERS. 2007-2 (DEC. 2007) *72 CHARACTER FILE NAMES. Evalplot
VERS. 2008-1 (JULY 2008) *UPDATED FOR MF=4/LTT = 3 = LEGENDRE Evalplot
PLUS TABULATED Evalplot
VERS. 2010-1 (Aug. 2010) *Extended to plots up to 100 Legendre Evalplot
Coefficients versus incident energy. Evalplot
VERS. 2011-1 (July 2011) *Increased MT.DAT from 200 to 1,000 Evalplot
entries, to acommodate new MTs. Evalplot
*Updated MF=10 plots to identify ZAP Evalplot
and state for Neutron Activation. Evalplot
*Updated for energy release parameters Evalplot
MF=3, MT=301 to 450. Evalplot
VERS. 2012-1 (Aug. 2012) *Updated incident particle list to Evalplot
include photon (ZA = 0). Evalplot
*Added CODENAME Evalplot
*32 and 64 bit Compatible Evalplot
*Added ERROR stops Evalplot
VERS. 2013-1 (Nov. 2013) *OUT9 replaced NORMX Evalplot
VERS. 2015-1 (Jan. 2015) *Updated MF=10 Labels, which requires Evalplot
longer plot titles. Evalplot
*Restricted character size multiplier Evalplot
to 0.5 to 1.5 to accommodate longer Evalplot
plot titles. Evalplot
*Replaced ALL 3 way if statements. Evalplot
VERS. 2015-2 (Mar. 2015) *Minor changes based on user feedback Evalplot
VERS. 2017-1 (May 2017) *Expanded storage to handle new Evalplot
R-M (LRF=7) angular distributions. Evalplot
*All floating input parameters changed Evalplot
tp character input + IN9 conversion. Evalplot
*Replaced Q Mev by MT= at top of plots Evalplot
(Q value in ENDF is now only defined Evalplot
in MF=3, making it difficult for all Evalplot
other MF now treated by this code) Evalplot
*Initial Linear X scaling for MF=1 Evalplot
*(nu-bar) and MF=4 (Legendre). Evalplot
* Unless energy range is requested = Evalplot
allows MF=1 and MF=4 default X Evalplot
scaling to be turned off by input Evalplot
parameters, i.e., by EVALPLOT or Evalplot
EVALHARD. Evalplot
Vers. 2018-1 (Jan. 2018) *Changed default Y range from 10^10 Evalplot
to 10^8 (Based on experience). Evalplot
*Extended to plot Electron cross Evalplot
sections (MT=525 through 528) Evalplot
*Extended to plot Electron Large Evalplot
Angle angular ditibutiond. Evalplot
Evalplot
Evalplot
2015-2 Acknowledgment Evalplot
===================== Evalplot
I thank Chuck Whitmer (TerraPower,WA) for reporting the errors Evalplot
that led to the 2015-2 Improvements in this code. Evalplot
Evalplot
I thank Jean-Christophe Sublet (UKAEA) for contributing MAC Evalplot
executables and Bojan Zefran (IJS, Slovenia) for contributing Evalplot
LINUX (32 or 63 bit) executables. And most of all I must thank Evalplot
Andrej Trkov (NDS, IAEA) for overseeing the entire PREPRO project Evalplot
at IAEA, Vienna. This was a truly International team who worked Evalplot
together to produce PREPRO 2015-2. Evalplot
Evalplot
OWNED, MAINTAINED AND DISTRIBUTED BY Evalplot
------------------------------------ Evalplot
THE NUCLEAR DATA SECTION Evalplot
INTERNATIONAL ATOMIC ENERGY AGENCY Evalplot
P.O. BOX 100 Evalplot
A-1400, VIENNA, AUSTRIA Evalplot
EUROPE Evalplot
Evalplot
ORIGINALLY WRITTEN BY Evalplot
------------------------------------ Evalplot
Dermott E. Cullen Evalplot
Evalplot
PRESENT CONTACT INFORMATION Evalplot
--------------------------- Evalplot
Dermott E. Cullen Evalplot
1466 Hudson Way Evalplot
Livermore, CA 94550 Evalplot
U.S.A. Evalplot
Telephone 925-443-1911 Evalplot
E. Mail RedCullen1@Comcast.net Evalplot
Website RedCullen1.net/HOMEPAGE.NEW Evalplot
Evalplot
AUTHORS MESSAGE Evalplot
--------------- Evalplot
THE REPORT DESCRIBED ABOVE IS THE LATEST PUBLISHED DOCUMENTATION Evalplot
FOR THIS PROGRAM. HOWEVER, THE COMMENTS BELOW SHOULD BE CONSIDERED Evalplot
THE LATEST DOCUMENTATION INCLUDING ALL RECENT IMPROVEMENTS. PLEASE Evalplot
READ ALL OF THESE COMMENTS BEFORE IMPLEMENTATION, PARTICULARLY Evalplot
THE COMMENTS CONCERNING MACHINE DEPENDENT CODING. Evalplot
Evalplot
AT THE PRESENT TIME WE ARE ATTEMPTING TO DEVELOP A SET OF COMPUTER Evalplot
INDEPENDENT PROGRAMS THAT CAN EASILY BE IMPLEMENTED ON ANY ONE Evalplot
OF A WIDE VARIETY OF COMPUTERS. IN ORDER TO ASSIST IN THIS PROJECT Evalplot
IT WOULD BE APPECIATED IF YOU WOULD NOTIFY THE AUTHOR OF ANY Evalplot
COMPILER DIAGNOSTICS, OPERATING PROBLEMS OR SUGGESTIONS ON HOW TO Evalplot
IMPROVE THIS PROGRAM. HOPEFULLY, IN THIS WAY FUTURE VERSIONS OF Evalplot
THIS PROGRAM WILL BE COMPLETELY COMPATIBLE FOR USE ON YOUR Evalplot
COMPUTER. Evalplot
Evalplot
PURPOSE Evalplot
------- Evalplot
THIS PROGRAM IS DESIGNED TO READ EVALUATED DATA FROM THE ENDF/B Evalplot
FORMAT AND TO PLOT THE DATA. THE USER MAY SELECT CROSS SECTIONS, Evalplot
PARAMETERS (E.G. NU-BAR, MU-BAR, ETC.), ANGULAR DISTRIBUTIONS Evalplot
AND/OR ENERGY DISTRIBUTIONS TO BE PLOTTED. Evalplot
Evalplot
IN THE FOLLOWING FOR SIMPLICITY THE ENDF/B TERMINOLOGY--ENDF/B Evalplot
TAPE--WILL BE USED. IN FACT THE ACTUAL MEDIUM MAY BE TAPE, CARDS, Evalplot
DISK OR ANY OTHER MEDIUM. Evalplot
Evalplot
ON WHAT COMPUTERS WILL THE PROGRAM RUN Evalplot
------------------------------------------------------------------ Evalplot
THE PROGRAM HAS BEEN IMPLEMENTED ON A WIDE VARIETY OF COMPUTERS Evalplot
FROM THE ONE EXTREME OF LARGE MAINFRAME CRAY AND IBM COMPUTERS Evalplot
TO THE OTHER EXTREME OF SUN TERMINALS AND IBM PERSONAL COMPUTERS. Evalplot
THE PROGRAM IS DESIGNED TO RUN ON VIRTUALLY ANY COMPUTER. FOR Evalplot
SPECIAL CONSIDERATIONS SEE THE SECTIONS BELOW ON, Evalplot
(1) COMPUTER DEPENDENT CODING Evalplot
(2) PLOTTER/GRAPHICS TERMINAL INTERFACE Evalplot
Evalplot
2015 PLOTTER DIMENSIONS Evalplot
================================================================== Evalplot
PLOTTER DIMENSIONS ARE IN INCHES - NOT CM, MM, OR CUBITS. Evalplot
THIS IS DONE FOR HISTORICAL REASONS AND HOPEFULLY THIS WILL Evalplot
NOT INCONVENIENCE ANYONE - IN PRACTICE I HAVE USED EXACTLY THE Evalplot
SAME DIMENSION = X = 0 to 12.5 and Y = 0 to 10 FOR DECADES Evalplot
TO PRODUCE BOTH ON-SCREEN AND HARDCOPY POSTSCRIPT PLOTS. Evalplot
Evalplot
I STRONGLY SUGGEST THAT YOU NOT CHANGE THESE DIMENSIONS UNLESS Evalplot
YOU MUST = BASED ON THE PLOT SIZE YOU OBTAIN WHEN YOU FIRST RUN Evalplot
THIS CODE. Evalplot
Evalplot
GRAPHICS INTERFACE Evalplot
------------------------------------------------------------------ Evalplot
THIS PROGRAM USES A SIMPLE CALCOMP LIKE GRAPHICS INTERFACE WHICH Evalplot
REQUIRES ONLY 3 SUBROUTINES...PLOTS, PLOT AND PEN (DESCRIBED IN Evalplot
DETAIL BELOW). ALL CHARACTERS AND SYMBOLS ARE DRAWN USING TABLES Evalplot
OF PEN STROKES (SUPPLIED WITH THIS PROGRAM). USING THIS METHOD Evalplot
THE PROGRAM SHOULD BE SIMPLE TO INTERFACE TO VIRTUALLY ANY PLOTTER Evalplot
OR GRAPHICS TERMINAL AND THE APPEARANCE AND LAYOUT OF THE PLOTS Evalplot
SHOULD BE INDEPENDENT OF WHICH PLOTTER IS USED. Evalplot
Evalplot
PROGRAM IDENTIFICATION Evalplot
---------------------- Evalplot
AS DISTRIBUTED THE FIRST FRAME OF PLOTTED OUTPUT WILL DOCUMENT Evalplot
THE PROGRAM NAME, VERSION AND INSTALLATION. THIS INFORMATION IS Evalplot
STORED AS DATA IN THE ARRAY VERSES NEAR THE BEGINNING OF Evalplot
SUBROUTINE FRAME1. IF YOU WISH TO CUSTOMIZE THE OUTPUT TO IDENTIFY Evalplot
YOUR INSTALLATION CHANGE THE LAST TWO LINES OF THE ARRAY VERSES. Evalplot
Evalplot
SIZE OF PLOTS Evalplot
------------- Evalplot
THE PROGRAM HAS A BUILT-IN DEFAULT SIZE TO MAKE EACH PLOT 13.50 Evalplot
BY 10.24 INCHES. THIS SIZE WAS SELECTED ASSUMING THAT THE Evalplot
RESOLUTION OF THE PLOTTER IS 1024 RASTER POINTS PER INCH. THE Evalplot
USER MAY CHANGE THE SIZE OF THE PLOT BY SPECIFYING ANY REQUIRED Evalplot
SIZE ON THE FIRST INPUT LINE. IN PARTICULAR FOR USE ON ANY PLOTTER Evalplot
THAT USES CENTIMETERS INSTEAD OF INCHES THE USER MAY MERELY Evalplot
SPECIFY THE REQUIRED SIZE OF THE PLOT IN CENTIMETERS (E.G., TO Evalplot
OBTAIN A 13.50 BY 10.24 INCH PLOT, THE USER NEED ONLY SPECIFY Evalplot
34.3 BY 26 ON THE FIRST INPUT LINE...ASSUMING 2.54 CENTIMETERS PER Evalplot
INCH, OR 343 BY 260 FOR MILLIMETERS..ASSUMING 25.4 MILLIMETERS Evalplot
PER INCH). Evalplot
Evalplot
CHARACTER SIZE Evalplot
-------------- Evalplot
THE PLOT HAS A BUILT-IN CHARACTER SIZE WHICH HAS BEEN DEFINED FOR Evalplot
COMPATIBILITY WITH THE BUILT-IN PLOT SIZE. IF THE USER SPECIFIES Evalplot
BY INPUT A DIFFERENT PLOT SIZE, THE PROGRAM WILL AUOTMATICALLY Evalplot
SCALE THE SIZE OF ALL CHARACTERS BY THE RATIO OF THE Y SIZE OF THE Evalplot
PLOT SPECIFIED BY THE USER TO THE BUILT-IN Y SIZE OF PLOTS (E.G., Evalplot
FOR PLOTS WHICH ARE ONLY 5.12 HIGH (Y DIRECTION) ALL CHARACTERS Evalplot
WILL BE SCALED TO BE ONLY 1/2 THE CHARACTER SIZE ON PLOTS WHICH Evalplot
ARE 10.24 HIGH (10.24 = THE BUILT-IN SIZE). NOTE, CHANGES IN THE Evalplot
X SIZE OF THE PLOT WILL NOT HAVE ANY EFFECT ON THE CHARACTER SIZE Evalplot
(E.G., FOR A LONG PLOT, 30 BY 10.24 THE CHARACTER SIZE WILL BE THE Evalplot
THE SAME AS ON A 13.50 BY 10.24 PLOT). Evalplot
Evalplot
PLOT PER FRAME Evalplot
-------------- Evalplot
BY INPUT THE USER CAN SPECIFY NOT ONLY THE ACTUAL SIZE OF THE Evalplot
LOCAL PLOTTER, BUT ALSO HOW MANY PLOTS SHOULD APPEAR ON EACH Evalplot
FRAME. THIS IS DONE BY SPECIFYING THE LAYOUT OF A FRAME IN TERMS Evalplot
OF THE NUMBER OF PLOTS IN THE X AND Y DIRECTION. FOR EXAMPLE BY Evalplot
SPECIFYING THAT EACH FRAME BE DIVIDED INTO 3 PLOTS IN THE X Evalplot
DIRECTION AND 2 PLOTS IN THE Y DIRECTION, EACH FRAME WILL CONTAIN Evalplot
UP TO 6 PLOTS (3 X 2). INTERNALLY EACH PLOT WILL BE GENERATED TO Evalplot
STANDARD A4 SIZE, AS DESCRIBED ABOVE, AND THEN ON OUTPUT SCALED Evalplot
TO THE NUMBER OF PLOTS PER FRAME SPECIFIED BY THE USER INPUT. Evalplot
Evalplot
ENDF/B FORMAT Evalplot
------------- Evalplot
THIS PROGRAM ONLY USES THE ENDF/B BCD OR CARD IMAGE FORMAT (AS Evalplot
OPPOSED TO THE BINARY FORMAT) AND CAN HANDLE DATA IN ANY VERSION Evalplot
OF THE ENDF/B FORMAT (I.E., ENDF/B-I, II,III, IV, V OR VI FORMAT). Evalplot
Evalplot
IT IS ASSUMED THAT THE DATA IS CORRECTLY CODED IN THE ENDF/B Evalplot
FORMAT AND NO ERROR CHECKING IS PERFORMED. IN PARTICULAR IT IS Evalplot
ASSUMED THAT THE MAT, MF AND MT ON EACH LINE IS CORRECT. SEQUENCE Evalplot
NUMBERS (COLUMNS 76-80) ARE IGNORED. FORMAT OF SECTION MT=452, 455 Evalplot
OF MF=1, AND ALL SECTIONS OF MF=3, 4 AND 5 MUST BE CORRECT. ALL Evalplot
OTHER SECTION OF DATA ARE SKIPPED AND AS SUCH THE OPERATION OF Evalplot
THIS PROGRAM IS INSENSITIVE TO THE CORRECTNESS OR INCORRECTNESS Evalplot
OF ALL OTHER SECTIONS. Evalplot
Evalplot
INTERPOLATION LAW Evalplot
----------------- Evalplot
EACH TABLE OF DATA MAY USE EITHER COMPLETELY HISTOGRAM OR Evalplot
COMPLETELY LINEAR INTERPOLATION LAW (THE TWO INTERPOLATION LAWS Evalplot
CANNOT BE MIXED TOGETHER IN ONE TABLE). EITHER OF THESE TWO Evalplot
REPRESENTATIONS WILL BE STORED IN CORE IN LINEARLY INTERPOLABLE Evalplot
FORM. IF THIS PROGRAM FINDS ANY DATA THAT USES ANY OTHER Evalplot
INTERPOLATION LAW IT WILL PRINT AN ERROR MESSAGE AND PLOT THE Evalplot
TABLE AS IF IT WERE LINEARLY INTERPOLABLE. THE ONLY ERROR THAT Evalplot
WILL RESULT IN THE PLOT WILL BE IN THE CURVE FOLLOWED BETWEEN Evalplot
TABULATED POINTS. PROGRAM LINEAR (UCRL-50400, VOL. 17, PART A) Evalplot
MAY BE USED TO CONVERT CROSS SECTIONS TO LINEARLY INTERPOLABLE Evalplot
FORM. PROGRAM LEGEND CAN BE USED FOR ANGULAR DISTRIBUTIONS AND Evalplot
PROGRAM ENERGY CAN BE USED FOR SECONDARY ENERGY DISTRIBUTIONS. Evalplot
Evalplot
REACTION INDEX Evalplot
-------------- Evalplot
THIS PROGRAM DOES NOT USE THE REACTION INDEX WHICH IS GIVEN IN Evalplot
SECTION MF=1, MT=451 OF EACH EVALUATION. Evalplot
Evalplot
PAGE SIZE Evalplot
--------- Evalplot
ONLY ONE PAGE OF DATA = 600000 DATA POINTS - IS KEPT IN CORE AT Evalplot
ANY GIVEN TIME. IF THERE IS MORE THAN THIS MANY POINTS THEY WILL Evalplot
BE KEPT ON A SCRATCH FILE AND LOADED INTO CORE AS NEEDED. Evalplot
Evalplot
TO CHANGE THE PAGE SIZE, Evalplot
Evalplot
1) CHANGE 600000 TO THE NEW PAGE SIZE Evalplot
2) CHANGE 1200000 TO TWO TIMES THE NEW PAGE SIZE Evalplot
Evalplot
SECTION SIZE Evalplot
------------ Evalplot
SINCE THIS PROGRAM USES A LOGICAL PAGING SYSTEM THERE IS NO LIMIT Evalplot
TO THE NUMBER OF POINTS IN ANY SECTION, E.G., THE TOTAL CROSS Evalplot
SECTION MAY BE REPRESENTED BY 200,000 DATA POINTS. Evalplot
Evalplot
THE ONLY EXCEPTION TO THIS RULE IS THAT EACH TABLE OF DATA WHICH Evalplot
USES A HISTOGRAM INTERPOLATION LAW CANNOT EXCEED HALF THE SIZE Evalplot
OF THE IN CORE PAGE (PRESENTLY 600000/2=300000) WHICH IS ADEQUATE Evalplot
FOR ALMOST ALL HISTOGRAM (E.G. MULTIGROUP) REPRESENTATIONS OF Evalplot
A SINGLE TABLE (E.G. REACTION). Evalplot
Evalplot
WHAT DATA CAN BE PLOTTED Evalplot
------------------------ Evalplot
THIS CODE CAN PLOT VIRTUALLY ANY NEUTRON OR PHOTON CROSS SECTIONS Evalplot
(MF=3 OR 23) AND ANY TABULATED ANGULAR OR ENERGY DISTRIBUTIONS OR Evalplot
LEGENDRE COEFFICIENTS. WHAT IS ACTUALLY PLOTTED DEPENDS ON WHAT Evalplot
DATA IS SELECTED BY THE USER. Evalplot
Evalplot
SELECTION OF DATA Evalplot
----------------- Evalplot
DATA TO BE PLOTTED IS SPECIFIED BY INPUTTING UP TO 100 MAT/MF/MT Evalplot
RANGES OR UP TO 100 ZA/MF/MT RANGES. IN ADDITION FOR EACH RANGE Evalplot
THE USER MAY SPECIFY AN X RANGE (USUALLY ENERGY) AND THE TYPE OF Evalplot
DATA TO BE PLOTTED (SEE: THE DESCRIPTION OF TYPES, BELOW). Evalplot
Evalplot
THE X RANGE FOR MF = 1, 3, 23 AND 27 AND MF = 4 LEGENDRE Evalplot
COEFFICIENTS WILL BE USED AS THE X LIMITS OF THE PLOTS, E.G., Evalplot
PLOT ENERGY DEPENDENT CROSS SECTIONS BETWEEN 1 AND 20 MEV. Evalplot
Evalplot
THE X RANGE FOR MF = 4 AND 5 WILL BE USED TO ONLY SELECT ANGULAR Evalplot
AND ENERGY DISTRIBUTION FOR WHICH THE INCIDENT NEUTRON ENERGY Evalplot
IS IN THE X RANGE. E.G., ONLY PLOT ANGULAR DISTRIBUTIONS WHERE Evalplot
THE INCIDENT NEUTRON ENERGY IS 1 TO 20 MEV. Evalplot
Evalplot
INTERACTIVE VS. BATCH MODE Evalplot
-------------------------- Evalplot
VERSION 92-1 AND LATER VERSIONS OF THIS CODE ONLY USE A BATCH Evalplot
MODE WHERE ALL REQUESTS ARE READ AND PROCESSED. EARLIER VERSIONS Evalplot
OF THIS CODE HAD BOTH AN INTERACTIVE MODE (WHERE REQUESTS WHERE Evalplot
READ AND EXECUTED ONE AT A TIME) AND A BATCH MODE. INTERACTIVE Evalplot
MODE HAS BEEN DROPPED AND WILL NOT TO REINTRODUCED UNLESS THE Evalplot
AUTHOR IS INFORMED BY USERS THAT THEY WERE USING THE INTERACTIVE Evalplot
MODE. Evalplot
Evalplot
PLOT LAYOUT Evalplot
----------- Evalplot
VERSION 92-1 AND LATER VERSIONS OF THIS CODE WILL PLOT ALL Evalplot
CURVES ON A SINGLE PLOT. EARLIER VERSIONS OF THIS CODE ALLOWED Evalplot
THE OPTION TO HAVE, Evalplot
MULTIPLE PLOTS - INDIVIDUAL SCALING Evalplot
MULTIPLE PLOTS - COMMON SCALING Evalplot
SINGLE PLOT Evalplot
MULTILE PLOTS PER PLOT HAVE BEEN DROPPED AND WILL NOT BE Evalplot
REINTRODUCED UNLESS IT IS DEMONSTRATED TO THE AUTHOR THAT THEY Evalplot
ARE OF PRACTICAL USE IN SOME APPLICATION. Evalplot
Evalplot
PROCESSING OF DATA Evalplot
------------------ Evalplot
IN THE CASE OF NEUTRON AND PHOTON CROSS SECTIONS (MF=3 OR 23) Evalplot
AND PARAMETERS (MF=1 OR 27) ALL DATA IN A FILE (MF) IS READ Evalplot
GROUPED TOGETHER BY TYPE (AS EXPLAINED BELOW) AND PLOTTED. Evalplot
Evalplot
IN THE CASE OF ANGULAR AND ENERGY DISTRIBUTIONS (MF=4 OR 5) ONLY Evalplot
ONE SECTION OF DATA AT A TIME IS READ AND PLOTTED. Evalplot
Evalplot
TYPES OF DATA (MF=1, 3, 23 AND 27 ONLY) Evalplot
--------------------------------------- Evalplot
THESE DATA ARE DIVIDED INTO UP TO 20 TYPES AND EACH TYPE OF Evalplot
DATA IS GROUPED TOGETHER AND PLOTTED (IF THE DATA IS ACTUALLY Evalplot
PRESENT). Evalplot
Evalplot
WHAT TYPE OF DATA IS ACTUALLY PLOTTED CAN BE CONTROLLED BY USER Evalplot
INPUT EITHER BASED ON SELECTED MAT/MF/MT OR ZA/MF/MT RANGES OR Evalplot
BY EXPLICITLY SELECTING ONLY ONE TYPE OF DATA IS TO BE PLOTTED Evalplot
(SEE THE DESCRIPTION OF INPUT BELOW). Evalplot
Evalplot
SIMPLE REQUESTS Evalplot
--------------- Evalplot
GENERALLY EACH MAT/MF/MT OR ZA/MF/MT REQUESTED IS TREATED Evalplot
SEPERATELY AND THE SPECIFIED DATA IS GROUPED BY TYPE AND PLOTTED. Evalplot
FOR EXAMPLE, THE USER MAY SPECIFY USING ONE REQUEST THAT ALL Evalplot
TYPES OF DATA BE PLOTTED OVER THE ENTIRE ENERGY RANGE AND USE Evalplot
A SECOND REQUEST TO SPECIFY THAT ONE PARTICULAR TYPE OF DATA Evalplot
BE PLOTTED OVER A SPECIFIC ENERGY RANGE. Evalplot
Evalplot
CHAINED REQUESTS Evalplot
---------------- Evalplot
REQUESTS MAY ALSO BE CHAINED TOGETHER (SEE, THE DESCRIPTION OF Evalplot
INPUT BELOW), WHERE A NUMBER OF REQUESTS MAY BE USED TO SELECT Evalplot
DATA, BUT ONLY THE LAST REQUEST IN A CHAIN WILL CAUSE ALL SELECTED Evalplot
DATA TO BE PLOTTED. CHAINED REQUESTED ARE INDICATED ON INPUT BY Evalplot
A SERIES OF REQUESTS FOR DATA TYPE = -1, EXCEPT FOR THE LAST Evalplot
REQUEST OF THE CHAIN, WHICH MUST SPECIFY A TYPE DATA = 0 (ALL) Evalplot
OR A POSITIVE NUMBER. UNLIKE SIMPLE REQUESTS, WHERE EACH WILL Evalplot
PRODUCE ONE OR MORE PLOTS, WITH CHAINED REQUESTS THE ENTIRE Evalplot
SERIES OF CHAINED REQUESTS WILL BE TREATED AS A SINGLE REQUEST Evalplot
AND WILL PRODUCE ONE OR MORE PLOTS. Evalplot
Evalplot
FOR EXAMPLE, DATA TYPE = 1 WILL NORMALLY INCLUDE, Evalplot
MT = 1 - TOTAL Evalplot
= 2 - ELASTIC Evalplot
= 4 - TOTAL INELASTIC Evalplot
= 5 - (N,REMAINDER) Evalplot
= 18 - FISSION Evalplot
= 102 - CAPTURE Evalplot
IF YOU WISH TO EXCLUDE TOTAL INELASTIC FROM A PLOT YOU NEED ONLY Evalplot
SPECIFY TWO CHAINED REQUESTS THE FIRST TO SELECT MT = 1 THROUGH Evalplot
2 (TO INCLUDE TOTAL AND ELASTIC) AND A SECOND TO INCLUDE MT = 18 Evalplot
THROUGH 102. THE FIRST REQUEST SHOULD SPECIFY DATA TYPE = -1 AND Evalplot
SECOND 1 (THIS WILL CHAIN THE 2 REQUESTS TOGETHER, SO THAT MT =1 Evalplot
THROUGH 2, AND MT = 18 THROUGH 102 ALL APPEAR ON THE SAME PLOT). Evalplot
SINCE MT = 4 (TOTAL INELASTIC) IS NOT REQUESTED IT WILL NOT BE Evalplot
PLOTTED. Evalplot
Evalplot
DEFINITION OF 20 DATA TYPES Evalplot
------------------------------------------------------------------ Evalplot
NEUTRONS (MF = 3) Evalplot
----------------- Evalplot
(1) TOTAL, ELASTIC, CAPTURE, FISSION, TOTAL INELASTIC, REMAINDER Evalplot
(2) (N,2N), (N,3N) AND (N,N' CHARGED PARTICLE) Evalplot
(3) (N,CHARGED PARTICLE) Evalplot
(4) PARTICLE PRODUCTION (PROTON, DEUTERON, ETC.) AND DAMAGE Evalplot
(5) TOTAL, FIRST, SECOND, ETC. CHANCE FISSION. Evalplot
(6) TOTAL INELASTIC, INELASTIC DISCRETE LEVELS AND CONTINUUM Evalplot
(7) (N,P) TOTAL AND LEVELS (ONLY IF LEVELS ARE GIVEN) Evalplot
(8) (N,D) TOTAL AND LEVELS (ONLY IF LEVELS ARE GIVEN) Evalplot
(9) (N,T) TOTAL AND LEVELS (ONLY IF LEVELS ARE GIVEN) Evalplot
(10) (N,HE-3) TOTAL AND LEVELS (ONLY IF LEVELS ARE GIVEN) Evalplot
(11) (N,ALPHA) TOTAL AND LEVELS (ONLY IF LEVELS ARE GIVEN) Evalplot
(12) PARAMETERS MU-BAR, XI AND GAMMA Evalplot
(13) NU-BAR - TOTAL, PROMPT AND DELAYED Evalplot
(19) ENERGY RELEASE PARAMETERS, MF=3, MT=301-450 Evalplot
Evalplot
ACTIVATION (MF=10) Evalplot
------------------ Evalplot
(20) ALL mt=1 TO 999. Evalplot
Evalplot
PHOTONS (MF=23 AND 27) Evalplot
----------------------- Evalplot
(14) TOTAL, COHERENT, INCOHERENT, TOTAL PHOTOELECTRIC, TOTAL Evalplot
PAIR PRODUCTION Evalplot
(15) TOTAL AND SUBSHELL PHOTOELECTRIC Evalplot
(16) TOTAL, NUCLEAR AND ELECTRON PAIR PRODUCTION Evalplot
(17) COHERENT FORM FACTOR AND INCOHERENT SCATTERING FUNCTION Evalplot
(18) REAL AND IMAGINARY SCATTERING FACTORS Evalplot
Evalplot
Evalplot
IDENTIFICATION OF DATA Evalplot
---------------------- Evalplot
ALL PLOTS IDENTIFY THE TARGET, E.G., U-238 AND UNITS OF THE X AND Evalplot
Y AXIS, E.G., X = ENERGY (MEV) OR COSINE (LAB), ETC., Y = CROSS Evalplot
SECTION (BARNS) OR PROBABILITY/COSINE, ETC. Evalplot
Evalplot
FOR TYPES OF DATA (MF=1, 3, 23 AND 27) DIFFERENT REACTIONS (MT) Evalplot
ARE GROUPED TOGETHER TO APPEAR ON THE SAME PLOT. THE TITLE AT Evalplot
THE TOP OF THE PLOT WILL IDENTIFY THE TYPE OF DATA BEING PLOTTED Evalplot
AND THE LEGEND BOX WITHIN THE PLOT WILL IDENTIFY EACH REACTION. Evalplot
Evalplot
FOR ANGULAR AND ENERGY DISTRIBUTIONS (MF=4 OR 5) EACH PLOT WILL Evalplot
CONTAIN DATA FOR A SINGLE REACTION (MT) AND DIFFERENT INCIDENT Evalplot
NEUTRON ENERGIES. THE TITLE AT THE TOP OF THE PLOT WILL IDENTIFY Evalplot
THE REACTION AND THE LEGEND BOX WITHIN THE PLOT WILL IDENTIFY Evalplot
THE INCIDENT ENERGY. Evalplot
Evalplot
FOR LEGENDRE COEFFICIENT THE DATA IN ENDF/B FORMAT WILL BE Evalplot
INVERTED IN ORDER TO PRESENT EACH LEGENDRE COEFFICIENT VERSUS Evalplot
INCIDENT ENERGY. THE TITLE AT THE TOP OF THE PLOT WILL IDENTIFY Evalplot
THE REACTION AND THE LEGEND BOX WITHIN THE PLOT WILL IDENTIFY Evalplot
THE LEGENDRE ORDER. Evalplot
Evalplot
INPUT FILES Evalplot
----------- Evalplot
UNIT DESCRIPTION Evalplot
---- ----------- Evalplot
2 INPUT LINES (BCD - 80 CHARACTERS/RECORD) Evalplot
9 MT DEFINITIONS (BCD - 80 CHARACTERS/RECORD) Evalplot
10 ENDF/B DATA (BCD - 80 CHARACTERS/RECORD) Evalplot
12 SOFTWARE CHARACTERS (BCD - 80 CHARACTERS/RECORD) Evalplot
Evalplot
OUTPUT FILES Evalplot
------------ Evalplot
UNIT DESCRIPTION Evalplot
---- ----------- Evalplot
3 OUTPUT REPORT (BCD - 120 CHARACTERS/RECORD) Evalplot
16 PLOTTING UNIT Evalplot
Evalplot
SCRATCH FILES Evalplot
------------- Evalplot
UNIT DESCRIPTION Evalplot
---- ----------- Evalplot
11 SCRATCH FILE (BINARY - 960000 WORDS/RECORD = 2*PAGE SIZE) Evalplot
Evalplot
OPTIONAL STANDARD FILE NAMES (SEE SUBROUTINE FILIO1 AND FILIO2) Evalplot
--------------------------------------------------------------- Evalplot
UNIT FILE NAME Evalplot
---- ---------- Evalplot
2 EVALPLOT.INP Evalplot
3 EVALPLOT.LST Evalplot
9 MT.DAT Evalplot
10 ENDFB.IN (OR AS INPUT PARAMETER) Evalplot
11 (SCRATCH) Evalplot
12 PLOT.CHR Evalplot
16 (PLOTTING UNIT...USUALLY A DUMMY) Evalplot
Evalplot
INPUT PARAMETERS Evalplot
---------------- Evalplot
LINE COLUMNS FORMAT DESCRIPTION Evalplot
---- ------- ------ ----------- Evalplot
1 1-11 E11.4 LOWER X LIMIT OF PLOTTER Evalplot
12-22 E11.4 UPPER X LIMIT OF PLOTTER Evalplot
23-33 E11.4 LOWER Y LIMIT OF PLOTTER Evalplot
34-44 E11.4 UPPER Y LIMIT OF PLOTTER Evalplot
45-55 I11 NUMBER OF PLOTS PER FRAME IN X DIRECTION Evalplot
56-66 I11 NUMBER OF PLOTS PER FRAME IN Y DIRECTION Evalplot
67-70 F4.1 CHARACTER SIZE MULTIPLIER Evalplot
= 0 OR 1 - NORMAL CHARACTER SIZE Evalplot
= OTHERWISE - CHARACTERS SCALED BY THIS Evalplot
FACTOR. Evalplot
2 1-72 A72 ENDF/B DATA FILENAME Evalplot
(LEAVE BLANK FOR STANDARD = ENDFB.IN) Evalplot
3 1-11 I11 RETRIEVAL CRITERIA Evalplot
= 0 - MAT Evalplot
= 1 - ZA Evalplot
12-22 I11 TYPE OF GRID Evalplot
= 0 - TICK MARKS ON BORDER Evalplot
= 1 - SOLID AT COARSE INTERVALS Evalplot
= 2 - DASHED AT COARSE INTERVALS Evalplot
= 3 - SOLID AT FINE INTERVALS Evalplot
= 4 - DASHED AT FINE INTERVALS Evalplot
= 5 - SOLID COARSE/DASHED FINE GRID Evalplot
23-33 I11 SHOULD BORDER BE PLOTTED ON EACH PLOT Evalplot
= 0 - NO Evalplot
= 1 - YES Evalplot
34-44 I11 LINE THICKNESS Evalplot
= 0 - 5 = BORDER/CURVES/CHARACTERS Evalplot
=-1 - -5 = BORDER/CURVES (NOT CHARACTERS) Evalplot
NOTE, THE GRID IS NEVER THICK. Evalplot
45-55 I11 SHOULD TEMPERATURE BE PLOTTED. Evalplot
= 0 - YES Evalplot
= 1 - NO Evalplot
56-66 E11.4 ALLOWABLE RATIO OF PLOT Y RANGE MAXIMUM TO Evalplot
MINIMUM - IF THIS RATIO IS EXCEEDED THE Y Evalplot
RANGE MINIMUM WILL BE CHANGED TO THE Y RANGE Evalplot
MAXIMUM TIMES THIS RATIO. Evalplot
IF THIS RATIO IS NOT POSITIVE, IT IS Evalplot
INTERPRETED TO MEAN NO LIMIT ON Y RANGE. Evalplot
67-70 I4 BACKGROUND COLOR Evalplot
= 0 = BLACK Evalplot
= OTHERWISE = WHITE Evalplot
4-N 1- 6 I6 LOWER MAT OR ZA LIMIT Evalplot
7- 8 I2 LOWER MF LIMIT Evalplot
9-11 I3 LOWER MT LIMIT Evalplot
11-22 E11.4 LOWER X LIMIT (USUALLY ENERGY) - EV Evalplot
23-28 I6 UPPER MAT OR ZA LIMIT Evalplot
29-30 I2 UPPER MF LIMIT Evalplot
31-33 I3 UPPER MT LIMIT Evalplot
34-44 E11.4 UPPER X LIMIT (USUALLY ENERGY) - EV Evalplot
45-55 I11 TYPE OF DATA TO RETRIEVE AND PLOT Evalplot
= -1 - CHAIN THIS REQUEST TO THE NEXT ONE Evalplot
= 0 - ALL Evalplot
= 1-20 - TYPE AS SPECIFIED ABOVE Evalplot
Evalplot
THERE MAY BE UP 100 MAT/MF/MT OR ZA/MF/MT REQUEST RANGES. INPUT Evalplot
MUST BE TERMINATED BY A BLANK LINE. Evalplot
Evalplot
IF X LIMITS ARE NOT SPECIFIED (I.E., LOWER AND UPPER X LIMIT = 0) Evalplot
THIS WILL BE INTERPRETED TO MEAN NO LIMIT AND ALL DATA WILL BE Evalplot
PLOTTED OVER THEIR ENTIRE ENERGY RANGE, I.E., YOU NEED NOT Evalplot
KNOW AND SPECIFY THE ACTUAL ENERGY LIMITS OF THE DATA. Evalplot
Evalplot
EXAMPLE DEFINITION OF PLOTTER Evalplot
----------------------------- Evalplot
2015 - WARNING - THE FOLLOWING DESCRIPTION IS OUT-OF-DATE. Evalplot
TODAY THE DIMENSIONS OF THE PLOTTER ARE IN INCHES. Evalplot
Evalplot
THE FIRST INPUT LINE DEFINES THE DIMENSIONS OF THE PLOTTER BEING Evalplot
USED IN ANY UNITS (INCHES, CENTIMETERS, MILLIMETERS, ANYTHING) Evalplot
WHICH APPLY TO THE PLOTTER. IN ADDITION THE FIRST LINE DEFINES Evalplot
HOW MANY PLOTS SHOULD APPEAR ON EACH FRAME. THE PLOTTING AREA Evalplot
DEFINED ON THE FIRST INPUT LINE MAY BE SUBDIVIDED INTO ANY NUMBER Evalplot
OF PLOTS IN THE X AND Y DIRECTION. FOR EXAMPLE, TO PRODUCE A Evalplot
SERIES OF FRAMES EACH CONTAINING 3 PLOTS IN THE X DIRECTION AND Evalplot
2 PLOTS IN THE Y DIRECTION (6 PLOTS PER FRAME) COLUMN 45-55 OF Evalplot
THE FIRST INPUT LINE SHOULD BE 3 AND COLUMNS 56-66 SHOULD BE 2. Evalplot
Evalplot
IF THE LOCAL PLOTTER USES DIMENSIONS OF INCHES IN ORDER TO OBTAIN Evalplot
10 X 10 INCH FRAMES WITH 3 X 2 PLOTS PER FRAME THE FIRST INPUT Evalplot
LINE SHOULD BE, Evalplot
Evalplot
0.0 10.0 0.0 10.0 3 2 Evalplot
Evalplot
IF THE LOCAL PLOTTER USES DIMENSION OF MILLIMETERS THE SAME Evalplot
PHYSICAL SIZE PLOT MAY BE OBTAINED IF THE FIRST INPUT LINE IS, Evalplot
Evalplot
0.0 254.0 0.0 254.0 3 2 Evalplot
Evalplot
FOR SIMPLICITY THE FOLLOWING EXAMPLE INPUTS WILL NOT DISCUSS THE Evalplot
PHYSICAL DIMENSIONS OF THE PLOTTER AND THE FIRST INPUT LINE WILL Evalplot
IN ALL CASES INDICATE 10 X 10 INCH PLOTS WITH ONLY 1 PLOT PER Evalplot
FRAME. Evalplot
Evalplot
ALL OF THE FOLLOWING EXAMPLE WILL USE, Evalplot
1) A DASHED GRID (SECOND LINE, COLS. 12-22 = 2) Evalplot
2) NO BORDER (SECOND LINE, COLS. 23-33 = 0) Evalplot
3) LINE THICKNESS -2 (SECOND LINE, COLS. 34-44 =-2) Evalplot
4) TEMPERATURE ON PLOTS (SECOND LINE, COLS. 45-55 = 0) Evalplot
5) NO Y RANGE LIMIT (SECOND LINE, COLS. 56-66 = 0.0) Evalplot
Evalplot
EXAMPLE INPUT NO. 1 Evalplot
------------------- Evalplot
FOR ALL THORIUM AND URANIUM ISOTOPES PLOT NEUTRON CROSS SECTIONS Evalplot
ENTIRE ENERGY RANGE. IN ADDITION PLOT TYPE 1 DATA, MAJOR NEUTRON Evalplot
CROSS SECTIONS OVER THE ENERGY RANGE 1 EV TO 1 KEV. USE THE Evalplot
STANDARD FILENAME (ENDFB.IN) FOR THE ENDF/B DATA. THE FOLLOWING Evalplot
6 INPUT LINES ARE REQUIRED, Evalplot
Evalplot
0.0 10.0 0.0 10.0 3 2 Evalplot
ENDFB.IN Evalplot
1 2 0 -2 0 0.0 Evalplot
90000 3 0 90999 3999 0 Evalplot
90000 3 0 1.00000+ 090999 3999 1.00000+ 3 1 Evalplot
(BLANK LINE MUSE FOLLOW LAST REQUEST) Evalplot
Evalplot
EXAMPLE INPUT NO. 2 Evalplot
------------------- Evalplot
PLOT FE-56 ELASTIC AND INELASTIC ANGULAR DISTRIBUTIONS BETWEEN Evalplot
1 AND 20 MEV. THE FOLLOWING 6 INPUT LINES ARE REQUIRED, Evalplot
Evalplot
0.0 10.0 0.0 10.0 3 2 Evalplot
ENDFB.IN Evalplot
1 2 0 -2 0 0.0 Evalplot
26056 4 2 1.00000+ 626056 4 2 2.00000+ 7 0 Evalplot
26056 4 4 1.00000+ 626056 4 4 2.00000+ 7 0 Evalplot
(BLANK LINE MUSE FOLLOW LAST REQUEST) Evalplot
Evalplot
EXAMPLE INPUT NO. 3 (CHAINED INPUT) Evalplot
----------------------------------- Evalplot
FOR ALL THORIUM AND URANIUM ISOTOPES PLOT TOTAL, ELASTIC ,CAPTURE Evalplot
AND FISSION, BUT NOT INELASTIC CROSS SECTIONS OVER THERE ENTIRE Evalplot
ENERGY RANGE AND FROM 1 KEV TO 1 MEV. THE FOLLOWING 8 INPUT Evalplot
LINES ARE REQUIRED, Evalplot
Evalplot
0.0 10.0 0.0 10.0 3 2 Evalplot
ENDFB.IN Evalplot
1 2 0 -2 0 0.0 Evalplot
90000 3 1 90999 3 2 -1 Evalplot
90000 3 18 90999 3102 1 Evalplot
90000 3 1 1.00000+ 390999 3 2 1.00000+ 6 -1 Evalplot
90000 3 18 1.00000+ 390999 3102 1.00000+ 6 1 Evalplot
(BLANK LINE MUSE FOLLOW LAST REQUEST) Evalplot
Evalplot
NOTE, THIS EXAMPLE INCLUDES 2 CHAINED REQUESTED - INPUT LINES 3 Evalplot
AND 4 SELECTING DATA AND PRODUCING A PLOT OVER THE ENTIRE ENERGY Evalplot
RANGE AND INPUT LINES 5 AND 6 SELECTING THE SAME DATA AND Evalplot
PRODUCING A PLOT FROM 1 KEV TO 1 MEV. Evalplot
Evalplot
ANY NUMBER OF REQUEST LINES MAY TO CHAINED TOGETHER TO SELECT Evalplot
DATA. THE CHAIN ENDS WHERE THE TYPE OF DATA (COLS. 45-55) IS NOT Evalplot
NEGATIVE AND THEN THE SELECTED DATA WILL BE PLOTTED. Evalplot
Evalplot
EXAMPLE INPUT NO. 4 Evalplot
------------------- Evalplot
FOR THE SAME EXAMPLE AS ABOVE, EXCEPT USE A DIFFERENT FILENAME Evalplot
FOR THE ENDF/B DATA TO READ FROM A FILE TREE STRUCTURE. THE Evalplot
FOLLOWING 8 INPUT LINES ARE REQUIRED, Evalplot
Evalplot
0.0 10.0 0.0 10.0 3 2 Evalplot
EVALUATION/ENDFB6/THORIUM Evalplot
1 2 0 -2 0 0.0 Evalplot
90000 3 1 90999 3 2 -1 Evalplot
90000 3 18 90999 3102 1 Evalplot
90000 3 1 1.00000+ 390999 3 2 1.00000+ 6 -1 Evalplot
90000 3 18 1.00000+ 390999 3102 1.00000+ 6 1 Evalplot
(BLANK LINE MUST FOLLOW LAST REQUEST) Evalplot
Evalplot
===== PLOTTER/GRAPHICS TERMINAL INTERFACE ============================= Evalplot
Evalplot
THIS PROGRAM USES A SIMPLE CALCOMP LIKE INTERFACE INVOLVING Evalplot
ONLY 6 SUBROUTINES, Evalplot
Evalplot
STARPLOT - INITIALIZE PLOTTER Evalplot
NEXTPLOT - CLEAR THE SCREEN FOR THE NEXT PLOT Evalplot
ENDPLOTS - TERMINATE PLOTTING Evalplot
Evalplot
PLOT(X,Y,IPEN) - DRAW OR MOVE FROM LAST LOCATION TO (X,Y), Evalplot
END OF CURRENT PLOT OR END OF PLOTTING. Evalplot
IPEN = 2 - DRAW Evalplot
= 3 - MOVE Evalplot
Evalplot
PEN(IPEN) - SELECT COLOR. Evalplot
IPEN- COLOR = 1 TO N (N = ANY POSITIVE INTEGER) Evalplot
Evalplot
BOXCOLOR(X,Y,IFILL,IBORDER) - FILL A RECTANGULAR BOX DEFINED Evalplot
BY THE X AND Y CORNERS - X(1), Evalplot
X(2), Y(1),Y(2) Evalplot
IFILL - COLOR TO FILL BOX WITH Evalplot
IBORDER - COLOR OF BOX BORDER Evalplot
Evalplot
IN ORDER TO INTERFACE THIS PROGRAM FOR USE ON ANY PLOTTER WHICH Evalplot
DOES NOT USE THE ABOVE CONVENTIONS IT IS MERELY NECESSARY FOR THE Evalplot
THE USER TO WRITE 6 SUBROUTINES WITH THE NAMES PLOTS, PLOT AND PEN Evalplot
WITH THE SUBROUTINE ARGUMENTS DESCRIBED ABOVE AND TO THEN CALL THE Evalplot
LOCAL EQUIVALENT ROUTINES. Evalplot
Evalplot
COLOR PLOTS Evalplot
------------------------------------------------------------------ Evalplot
TO SELECT PLOTTING COLORS SUBROUTINE PEN (DESCRIBED ABOVE) IS USED Evalplot
TO SELECT ONE OF THE AVAILABLE COLORS. IF YOU HAVE COLOR ON YOUR Evalplot
PLOTTER YOU SHOULD PROVIDE A SUBROUTINE PEN TO SELECT COLORS. Evalplot
Evalplot
BLACK AND WHITE PLOTS Evalplot
------------------------------------------------------------------ Evalplot
WHEN PRODUCING BLACK AND WHITE PLOTS SUBROUTINE PEN NEED MERELY Evalplot
BE A DUMMY SUBROUTINE TO IGNORE ANY ATTEMPT TO CHANGE COLORS, Evalplot
Evalplot
SUBROUTINE PEN(IPEN) Evalplot
RETURN Evalplot
END Evalplot
Evalplot
SIMILAR BOXCOLOR CAN BE A DUMMY Evalplot
Evalplot
SUBROUTINE BOXCOLOR(X,Y,IFILL,IBORDER) Evalplot
RETURN Evalplot
END Evalplot
Evalplot
CHARACTER SET Evalplot
------------------------------------------------------------------ Evalplot
THIS PROGRAM USES COMPUTER AND PLOTTER DEVICE INDEPENDENT SOFTWARE Evalplot
CHARACTERS. THIS PROGRAM COMES WITH A FILE THAT DEFINES THE PEN Evalplot
STROKES REQUIRED TO DRAW ALL CHARACTERS ON AN IBM KEYBOARD (UPPER Evalplot
AND LOWER CASE CHARACTERS, NUMBERS, ETC.) PLUS AN ALTERNATE SET OF Evalplot
ALL UPPER AND LOWER CASE GREEK CHARACTERS AND ADDITIONAL SPECIAL Evalplot
SYMBOLS. Evalplot
Evalplot
THE SOFTWARE CHARACTER TABLE CONTAINS X AND Y AND PEN POSITIONS TO Evalplot
DRAW EACH CHARACTER. IF YOU WISH TO DRAW ANY ADDITIONAL CHARACTERS Evalplot
OR TO MODIFY THE FONT OF THE EXISTING CHARACTERS YOU NEED ONLY Evalplot
MODIFY THIS TABLE. Evalplot
Evalplot
ADDITIONAL FONTS Evalplot
---------------- Evalplot
THIS PROGRAM COMES WITH 3 COMPLETE SETS OF THE SAME CHARACTERS Evalplot
USING DIFFERENT FONTS. FOR SPEED IN PLOTTING IT IS RECOMMENDED Evalplot
THAT YOU USE THE SIMPLEX FONT. FOR FINISHED PLOTS SUITABLE FOR Evalplot
PUBLICATION, BUT REQUIRING MORE TIME TO GENERATE A PLOT, IT IS Evalplot
RECOMMENDED THAT YOU USE THE DUPLEX OR COMPLEX FONT - YOU CAN Evalplot
EXPERIMENT WITH ANY OF THE 3 FONTS TO DETERMINE WHICH BEST MEETS Evalplot
YOUR NEEDS. Evalplot
Evalplot
TO USE ANY ONE OF THE FONTS MERELY BY SURE THAT IT IS DEFINED AS Evalplot
UNIT 12 FOR INPUT (IF USING STANDARD FILENAMES IT SHOULD BE Evalplot
NAMED PLOT.CHR). SO THAT SWITCHING FONTS CAN BE SIMPLY DONE Evalplot
MERELY BY COPYING THE FONT THAT YOU WANT TO THE UNIT 12 THAT Evalplot
YOU ARE USING FOR INPUT. Evalplot
Evalplot
CONTROL CHARACTERS Evalplot
------------------------------------------------------------------ Evalplot
IN THE SOFTWARE CHARACTER TABLE ALL CHARACTERS TO BE PLOTTED WILL Evalplot
HAVE PEN POSITION = 2 (DRAW) OR = 3 (MOVE). IN ADDITION THE TABLE Evalplot
CURRENTLY CONTAINS 4 CONTROL CHARACTERS, Evalplot
Evalplot
PEN POSITION = 0 Evalplot
---------------- Evalplot
SHIFT THE NEXT PRINTED CHARACTER BY X AND Y. 3 CONTROL CHARACTERS Evalplot
ARE PRESENTLY INCLUDED IN THE SOFTWARE CHARACTER TABLE TO ALLOW Evalplot
SHIFTING. Evalplot
Evalplot
{ = SHIFT UP (FOR SUPERSCRIPTS..............X= 0.0, Y= 0.5) Evalplot
} = SHIFT DOWN (FOR SUBSCRIPTS..............X= 0.0, Y=-0.5) Evalplot
\ = SHIFT LEFT 1 CHARACTER (FOR BACKSPACE...X=-1.0, Y= 0.0) Evalplot
Evalplot
PEN POSITION =-1 Evalplot
---------------- Evalplot
SELECT THE NEXT PRINTED CHARACTER FROM THE ALTERNATE CHARACTER Evalplot
SET. AT PRESENT THIS CONTROL CHARACTER IS, Evalplot
Evalplot
| = SWITCH TO ALTERNATE CHARACTER SET Evalplot
Evalplot
THESE 4 CONTROL CHARACTERS ARE ONLY DEFINED BY THE VALUE OF THE Evalplot
PEN POSITION IN THE SOFTWARE CHARACTER TABLE (I.E., THEY ARE NOT Evalplot
HARD WIRED INTO THIS PROGRAM). AS SUCH BY MODIFYING THE SOFTWARE Evalplot
CHARACTER TABLE THE USER HAS THE OPTION OF DEFINING ANY CONTROL Evalplot
CHARACTERS TO MEET SPECIFIC NEEDS. Evalplot
Evalplot
THESE CHARACTERS MAY BE USED IN CHARACTER STRINGS TO PRODUCE Evalplot
SPECIAL EFFECTS. FOR EXAMPLE, TO PLOT SUBSCRIPT 5, B, SUPERSCRIPT Evalplot
10 USE THE STRING, Evalplot
Evalplot
}5B{1{0 Evalplot
Evalplot
TO PLOT B, SUBSCRIPT 5 AND SUPERSCRIPT 10 WITH THE 5 DIRECTLY Evalplot
BELOW THE 1 OF THE 10 WE CAN USE THE BACKSPACE CHARACTER TO Evalplot
POSITION THE 1 DIRECTLY ABOVE THE 5 USING THE STRING, Evalplot
Evalplot
B}5\{1{0 Evalplot
Evalplot
TO PLOT UPPER CASE GREEK GAMMA FOLLOWED BY THE WORD TOTAL (I.E., Evalplot
RESONANCE TOTAL WIDTH) USE THE STRING. Evalplot
Evalplot
|G TOTAL Evalplot
Evalplot
NOTE, WHEN THESE CONTROL CHARACTERS ARE USED THEY ONLY EFFECT THE Evalplot
NEXT 1 PRINTED CHARACTER (SEE, ABOVE EXAMPLE OF PLOTTING SUPER- Evalplot
SCRIPT 10 WHERE THE SHIFT UP CONTROL CHARACTER WAS USED BEFORE THE Evalplot
1 AND THEN AGAIN BEFORE THE 0 AND THE BACKSPACE AND SHIFT UP Evalplot
CONTROL CHARACTERS WERE USED IN COMBINATION). Evalplot
Evalplot
IF THESE 4 CONTROL CHARACTERS ARE NOT AVAILABLE ON YOUR COMPUTER Evalplot
YOU CAN MODIFY THE SOFTWARE CHARACTER TABLE TO USE ANY OTHER 4 Evalplot
CHARACTERS THAT YOU DO NOT NORMALLY USE IN CHARACTER STRINGS (FOR Evalplot
DETAILS SEE THE SOFTWARE CHARACTER TABLE). Evalplot
Evalplot
STANDARD/ALTERNATE CHARACTER SETS Evalplot
------------------------------------------------------------------ Evalplot
THE SOFTWARE CHARACTER TABLE CONTAINS 2 SETS OF CHARACTERS WHICH Evalplot
ARE A STANDARD SET (ALL CHARACTERS ON AN IBM KEYBOARD) AND AN Evalplot
ALTERNATE SET (UPPER AND LOWER CASE GREEK CHARACTERS AND SPECIAL Evalplot
CHARACTERS). TO DRAW A CHARACTER FROM THE ALTERNATE CHARACTER SET Evalplot
PUT A RIGHT BRACKET CHARACTER (|) BEFORE A CHARACTER (SEE THE Evalplot
ABOVE EXAMPLE AND THE SOFTWARE CHARACTER TABLE FOR DETAILS). THIS Evalplot
CONTROL CHARACTER WILL ONLY EFFECT THE NEXT 1 PLOTTED CHARACTER. Evalplot
Evalplot
SUB AND SUPER SCRIPTS Evalplot
------------------------------------------------------------------ Evalplot
TO DRAW SUBSCRIPT PRECEED A CHARACTER BY }. TO DRAW SUPERSCRIPT Evalplot
PRECEED A CHARACTER BY { (SEE THE ABOVE EXAMPLE AND THE SOFTWARE Evalplot
CHARACTER TABLE FOR DETAILS). THESE CONTROL CHARACTER WILL ONLY Evalplot
EFFECT THE NEXT 1 PLOTTED CHARACTER. Evalplot
Evalplot
BACKSPACING Evalplot
------------------------------------------------------------------ Evalplot
TO BACKSPACE ONE CHARACTER PRECEED A CHARACTER BY \ (SEE, THE Evalplot
ABOVE EXAMPLE AND THE SOFTWARE CHARACTER TABLE FOR DETAILS). THIS Evalplot
CONTROL CHARACTER WILL PERFORM A TRUE BACKSPACE AND WILL EFFECT Evalplot
ALL FOLLOWING CHARACTERS IN THE SAME CHARACTER STRING. Evalplot
Evalplot
PLOT DIMENSIONS Evalplot
--------------- Evalplot
ARE DEFINED BY USER INPUT. INTERNALLY THE PROGRAM WILL CREATE A Evalplot
PLOT IN APPROXIMATELY A4 OR 8-1/2 BY 11 INCH FORMAT. DURING Evalplot
OUTPUT THE PLOT IS TRANSFORMED TO THE UNITS (INCHES, CENTIMETERS, Evalplot
MILLIMETERS, WHATEVER) OF THE PLOTTER BEING USED AND OUTPUT. Evalplot
Evalplot
===== PLOTTER/GRAPHICS TERMINAL INTERFACE ============================= Evalplot
======================================================================= Evalplot