=======================================================================LINEAR
LINEAR
PROGRAM LINEAR LINEAR
============== LINEAR
VERSION 74-1 (MAY 1974) LINEAR
VERSION 75-1 (APRIL 1975) LINEAR
VERSION 76-2 (OCTOBER 1976) LINEAR
VERSION 77-1 (JANUARY 1977) LINEAR
VERSION 78-1 (JULY 1978) LINEAR
VERSION 79-1 (JULY 1979) CDC-7600 AND CRAY-1 VERSION. LINEAR
VERSION 80-1 (MAY 1980) IBM, CDC AND CRAY VERSION. LINEAR
VERSION 80-2 (DECEMBER 1980) LINEAR
VERSION 81-1 (MARCH 1981) LINEAR
VERSION 82-1 (JANUARY 1982) IMPROVED COMPUTER COMPATIBILITY. LINEAR
VERSION 83-1 (JANUARY 1983) *MAJOR RE-DESIGN. LINEAR
*PAGE SIZE INCREASED - 1002 TO 3006. LINEAR
*ELIMINATED COMPUTER DEPENDENT CODING.LINEAR
*NEW, MORE COMPATIBLE I/O UNIT NUMBER.LINEAR
*ADDED OPTION TO KEEP ALL ORIGINAL LINEAR
ENERGY POINTS FROM EVALUATION. LINEAR
*ADDED STANDARD ALLOWABLE ERROR OPTIONLINEAR
(CURRENTLY 0.1 PER-CENT). LINEAR
VERSION 83-2 (OCTOBER 1983) IMPROVED BASED ON USER COMMENTS. LINEAR
VERSION 84-1 (APRIL 1984) IMPROVED BASED ON USER COMMENTS. LINEAR
VERSION 84-2 (JUNE 1984) *UPDATED FOR ENDF/B-6 FORMATS. LINEAR
*SPECIAL I/O ROUTINES TO GUARANTEE LINEAR
ACCURACY OF ENERGY. LINEAR
*DOUBLE PRECISION TREATMENT OF ENERGY LINEAR
(REQUIRED FOR NARROW RESONANCES). LINEAR
VERSION 85-1 (AUGUST 1985) *FORTRAN-77/H VERSION LINEAR
VERSION 86-1 (JANUARY 1986)*ENDF/B-6 FORMAT LINEAR
VERSION 87-1 (JANUARY 1987)*DOUBLE PRECISION TREATMENT OF CROSS LINEAR
SECTION LINEAR
VERSION 88-1 (JULY 1988) *OPTION...INTERNALLY DEFINE ALL I/O LINEAR
FILE NAMES (SEE, SUBROUTINE FILEIO LINEAR
FOR DETAILS). LINEAR
*IMPROVED BASED ON USER COMMENTS. LINEAR
VERSION 89-1 (JANUARY 1989)*PSYCHOANALYZED BY PROGRAM FREUD TO LINEAR
INSURE PROGRAM WILL NOT DO ANYTHING LINEAR
CRAZY. LINEAR
*UPDATED TO USE NEW PROGRAM CONVERT LINEAR
KEYWORDS. LINEAR
*ADDED LIVERMORE CIVIC COMPILER LINEAR
CONVENTIONS. LINEAR
VERSION 90-1 (JUNE 1990) *EXTENDED TO LINEARIZE PHOTON LINEAR
INTERACTION DATA, MF=23 AND 27 LINEAR
*ADDED FORTRAN SAVE OPTION LINEAR
*UPDATED BASED ON USER COMMENTS. LINEAR
*NEW MORE CONSISTENT ENERGY OUTPUT LINEAR
ROUTINE. LINEAR
*WARNING...INPUT PARAMETER FORMAT LINEAR
HAS BEEN CHANGED...SEE DESCRIPTION LINEAR
BELOW. LINEAR
VERSION 91-1 (JULY 1991) *ADDED INTERPOLATION LAW 6 - ONLY USED LINEAR
FOR CHARGED PARTICLE CROSS SECTIONS LINEAR
FOR COULOMB PENETRABILITIES. LINEAR
VERSION 92-1 (JANUARY 1992)*ADDED NU-BAR (TOTAL, DELAYED, PROMPT) LINEAR
POLYNOMIAL OR TABULATED ALL CONVERTED LINEAR
TO LINEARLY INTERPOLABLE LINEAR
*INCREASED PAGE SIZE FROM 3006 TO 5010 LINEAR
POINTS. LINEAR
*ALL ENERGIES INTERNALLY ROUNDED PRIOR LINEAR
TO CALCULATIONS. LINEAR
*COMPLETELY CONSISTENT I/O AND ROUNDINGLINEAR
ROUTINES - TO MINIMIZE COMPUTER LINEAR
DEPENDENCE. LINEAR
VERSION 92-2 (JULY 1992) *CORRECTED CONVERSION OF NU-BAR FROM LINEAR
POLYNOMIAL TO TABULATED - COPY LINEAR
SPONTANEOUS NU-BAR (BY DEFINITION LINEAR
THE SPONTANEOUS NU-BAR IS NOT AN LINEAR
ENERGY DEPENDENT QUANTITY). LINEAR
VERSION 93-1 (MARCH 1993) *UPDATED FOR USE WITH LAHEY COMPILER LINEAR
ON IBM-PCS. LINEAR
*INCREASED PAGE SIZE FROM 5010 TO LINEAR
30000 POINTS LINEAR
VERSION 94-1 (JANUARY 1994)*VARIABLE ENDF/B DATA FILENAMES LINEAR
TO ALLOW ACCESS TO FILE STRUCTURES LINEAR
(WARNING - INPUT PARAMETER FORMAT LINEAR
HAS BEEN CHANGED) LINEAR
*CLOSE ALL FILES BEFORE TERMINATING LINEAR
(SEE, SUBROUTINE ENDIT) LINEAR
VERSION 96-1 (JANUARY 1996) *COMPLETE RE-WRITE LINEAR
*IMPROVED COMPUTER INDEPENDENCE LINEAR
*ALL DOUBLE PRECISION LINEAR
*ON SCREEN OUTPUT LINEAR
*UNIFORM TREATMENT OF ENDF/B I/O LINEAR
*IMPROVED OUTPUT PRECISION LINEAR
*DEFINED SCRATCH FILE NAMES LINEAR
*ALWAYS INCLUDE THERMAL VALUE LINEAR
*INCREASED PAGE SIZE FROM 30000 TO LINEAR
60000 POINTS LINEAR
VERSION 99-1 (MARCH 1999) *CORRECTED CHARACTER TO FLOATING LINEAR
POINT READ FOR MORE DIGITS LINEAR
*UPDATED TEST FOR ENDF/B FORMAT LINEAR
VERSION BASED ON RECENT FORMAT CHANGELINEAR
*GENERAL IMPROVEMENTS BASED ON LINEAR
USER FEEDBACK LINEAR
VERSION 99-2 (JUNE 1999) *ASSUME ENDF/B-VI, NOT V, IF MISSING LINEAR
MF=1, MT-451. LINEAR
VERS. 2000-1 (FEBRUARY 2000)*ADDED MF = 9 AND 10 LINEARIZATION LINEAR
*GENERAL IMPROVEMENTS BASED ON LINEAR
USER FEEDBACK LINEAR
VERS. 2002-1 (MAY 2002) *OPTIONAL INPUT PARAMETERS LINEAR
VERS. 2004-1 (JAN. 2004) *GENERAL UPDATE BASED ON USER FEEDBACKLINEAR
VERS. 2005-1 (JAN. 2005) *ALWAYS KEEP ORIGINAL TABULATED LINEAR
NU-BAR POINTS. LINEAR
VERS. 2006-1 (FEB. 2006) *CORRECTED INT=6 NEAR THRESHOLD LINEAR
*NO SUBDIVIDE BELOW MINIMUM XCLOW LINEAR
VERS. 2007-1 (JAN. 2007) *CHECKED AGAINST ALL ENDF/B-VII. LINEAR
*INCREASED PAGE SIZE FROM 60,000 TO LINEAR
600,000 POINTS LINEAR
VERS. 2007-2 (DEC. 2007) *72 CHARACTER FILE NAMES. LINEAR
VERS. 2010-1 (Apr. 2010) *Skipped leading cross section = 0 LINEAR
up to effective start, unless keepingLINEAR
ALL original energy points. LINEAR
*Replaced ETHRES by ESTART - it is LINEAR
not a threshold - just a minimum LINEAR
energy - if a section starts above LINEAR
this energy with a positive cross LINEAR
section, an additional point will LINEAR
inserted with cross section = 0. LINEAR
VERS. 2012-1 (Aug. 2012) *Minor Updates based on User Feedback.LINEAR
*Added CODENAME LINEAR
*32 and 64 bit Compatible LINEAR
*Added ERROR stops. LINEAR
VERS. 2012-2 (Nov. 2012) *Never thin nu-bar. LINEAR
VERS. 2013-1 (Nov. 2013) *Extended OUT9. LINEAR
VERS. 2015-1 (Jan. 2015) *Allow Imaginary Anomolous Scattering LINEAR
Factor to be Negative (MF/MT=27/506).LINEAR
*Replaced ALL 3 way IF Statements. LINEAR
VERS. 2016-1 (June 2016) *Cosmetic changes based on FREUD LINEAR
psychoanalysis. LINEAR
VERS. 2017-1 (May 2017) *Updated based on user feedback. LINEAR
*Inceased page size to 3,000,000. LINEAR
*All floating input parameters changedLINEAR
to character input + IN9 conversion. LINEAR
VERS. 2018-1 (Dec. 2018) *Updated based on user feedback. LINEAR
*Added on-line output for ALL ENDERRORLINEAR
VERS. 2019-1 (June 2019) *Additional Interpolation Law Tests LINEAR
*Checked Maximum Tabulated Energy to LINEAR
insure it is the same for all MTs - LINEAR
if not, print WARNING messages. LINEAR
*Corrected END Histogram linearized - LINEAR
Previously assumed Y = 0 and deleted LINEAR
now whatever the value it is includedLINEAR
VERS. 2020-1 (Dec. 2020) *Major Re-write of Convergence LINEAR
*Replaced INCORE9 by INCORE10. LINEAR
*Added Target Isomer Flag LINEAR
*Keep iterating toward MAX & MIN LINEAR
VERS. 2021-1 (Mar. 2021) *Complete re-write of convergence. LINEAR
*Optionlly add MF/MT=1/451 comments LINEAR
*Updated from FORTRAN 2018 LINEAR
*Minimum Cross Section is no longer LINEAR
an input option = set to 1.0d-30. LINEAR
LINEAR
OWNED, MAINTAINED AND DISTRIBUTED BY LINEAR
------------------------------------ LINEAR
THE NUCLEAR DATA SECTION LINEAR
INTERNATIONAL ATOMIC ENERGY AGENCY LINEAR
P.O. BOX 100 LINEAR
A-1400, VIENNA, AUSTRIA LINEAR
EUROPE LINEAR
LINEAR
ORIGINALLY WRITTEN BY LINEAR
------------------------------------ LINEAR
Dermott E. Cullen LINEAR
LINEAR
PRESENT CONTACT INFORMATION LINEAR
--------------------------- LINEAR
Dermott E. Cullen LINEAR
1466 Hudson Way LINEAR
Livermore, CA 94550 LINEAR
U.S.A. LINEAR
Telephone 925-443-1911 LINEAR
E. Mail RedCullen1@Comcast.net LINEAR
Website RedCullen1.net/HOMEPAGE.NEW LINEAR
LINEAR
AUTHORS MESSAGE LINEAR
--------------- LINEAR
THE REPORT DESCRIBED ABOVE IS THE LATEST PUBLISHED DOCUMENTATION LINEAR
FOR THIS PROGRAM. HOWEVER, THE COMMENTS BELOW SHOULD BE CONSIDEREDLINEAR
THE LATEST DOCUMENTATION INCLUDING ALL RECENT IMPROVEMENTS. PLEASELINEAR
READ ALL OF THESE COMMENTS BEFORE IMPLEMENTATION. LINEAR
LINEAR
AT THE PRESENT TIME WE ARE ATTEMPTING TO DEVELOP A SET OF COMPUTERLINEAR
INDEPENDENT PROGRAMS THAT CAN EASILY BE IMPLEMENTED ON ANY ONE LINEAR
OF A WIDE VARIETY OF COMPUTERS. IN ORDER TO ASSIST IN THIS PROJECTLINEAR
IT WOULD BE APPECIATED IF YOU WOULD NOTIFY THE AUTHOR OF ANY LINEAR
COMPILER DIAGNOSTICS, OPERATING PROBLEMS OR SUGGESTIONS ON HOW TO LINEAR
IMPROVE THIS PROGRAM. HOPEFULLY, IN THIS WAY FUTURE VERSIONS OF LINEAR
THIS PROGRAM WILL BE COMPLETELY COMPATIBLE FOR USE ON YOUR LINEAR
COMPUTER. LINEAR
LINEAR
PURPOSE LINEAR
------- LINEAR
THIS PROGRAM IS DESIGNED TO CONVERT ENDF/B FILE 3, 23 AND 27 DATA LINEAR
TO LINEAR-LINEAR INTERPOLABLE FORM. ANY SECTION THAT IS ALREADY LINEAR
LINEAR-LINEAR INTERPOLABLE WILL BE THINNED. LINEAR
LINEAR
IN THE FOLLOWING DISCUSSION FOR SIMPLICITY THE ENDF/B TERMINOLOGY LINEAR
---ENDF/B TAPE---WILL BE USED. IN FACT THE ACTUAL MEDIUM MAY BE LINEAR
TAPE, CARDS, DISK OR ANY OTHER MEDIUM. LINEAR
LINEAR
ENDF/B FORMAT LINEAR
------------- LINEAR
THIS PROGRAM ONLY USES THE ENDF/B BCD OR CARD IMAGE FORMAT (AS LINEAR
OPPOSED TO THE BINARY FORMAT) AND CAN HANDLE DATA IN ANY VERSION LINEAR
OF THE ENDF/B FORMAT (I.E., ENDF/B-1, 2, 3, 4, 5, 6 FORMAT). LINEAR
LINEAR
IT IS ASSUMED THAT THE DATA IS CORRECTLY CODED IN THE ENDF/B LINEAR
FORMAT AND NO ERROR CHECKING IS PERFORMED. IN PARTICULAR IT IS LINEAR
ASSUMED THAT THE MAT, MF AND MT ON EACH LINE IS CORRECT. SEQUENCE LINEAR
NUMBERS (COLUMNS 76-80) ARE IGNORED ON INPUT, BUT WILL BE LINEAR
CORRECTLY OUTPUT ON ALL LINES. THE FORMAT OF SECTION MF=1, MT=451 LINEAR
AND ALL SECTIONS OF MF=3 MUST BE CORRECT. THE PROGRAM COPIES ALL LINEAR
OTHER SECTION OF DATA AS HOLLERITH AND AS SUCH IS INSENSITIVE TO LINEAR
THE CORRECTNESS OR INCORRECTNESS OF ALL OTHER SECTIONS. LINEAR
LINEAR
OUTPUT FORMAT LINEAR
------------- LINEAR
IN THIS VERSION OF LINEAR ALL ENERGIES WILL BE OUTPUT IN LINEAR
F (INSTEAD OF E) FORMAT IN ORDER TO ALLOW ENERGIES TO BE WRITTEN LINEAR
WITH UP TO 9 DIGITS OF ACCURACY. IN PREVIOUS VERSIONS THIS WAS AN LINEAR
OUTPUT OPTION. HOWEVER USE OF THIS OPTION TO COMPARE THE RESULTS LINEAR
OF ENERGIES WRITTEN IN THE NORMAL ENDF/B CONVENTION OF 6 DIGITS LINEAR
TO THE 9 DIGIT OUTPUT FROM THIS PROGRAM DEMONSTRATED THAT FAILURE LINEAR
TO USE THE 9 DIGIT OUTPUT CAN LEAD TO LARGE ERRORS IN THE DATA LINEAR
DUE TO TRUNCATION OF ENERGIES TO 6 DIGITS DURING OUTPUT. LINEAR
LINEAR
CONTENTS OF OUTPUT LINEAR
------------------ LINEAR
ENTIRE EVALUATIONS ARE OUTPUT, NOT JUST THE LINEARIZED DATA LINEAR
CROSS SECTIONS, E.G. ANGULAR AND ENERGY DISTRIBUTIONS ARE ALSO LINEAR
INCLUDED. LINEAR
LINEAR
DOCUMENTATION LINEAR
------------- LINEAR
THE FACT THAT THIS PROGRAM HAS OPERATED ON THE DATA IS DOCUMENTED LINEAR
BY THE ADDITION OF 3 COMMENT LINES AT THE END OF EACH HOLLERITH LINEAR
SECTION IN THE FORM LINEAR
LINEAR
***************** PROGRAM LINEAR (2021-1) **************** LINEAR
FOR ALL DATA GREATER THAN 1.00000-30 IN ABSOLUTE VALUE LINEAR
DATA LINEARIZED TO WITHIN AN ACCURACY OF 0.1 PER-CENT LINEAR
LINEAR
THE ORDER OF SIMILAR COMMENTS (FROM RECENT, SIGMA1 AND GROUPIE) LINEAR
REPRESENTS A COMPLETE HISTORY OF ALL OPERATIONS PERFORMED ON LINEAR
THE DATA BY THESE PROGRAMS. LINEAR
LINEAR
THESE COMMENT LINES ARE ONLY ADDED TO EXISTING HOLLERITH SECTIONS,LINEAR
I.E., THIS PROGRAM WILL NOT CREATE A HOLLERITH SECTION. THE FORMATLINEAR
OF THE HOLLERITH SECTION IN ENDF/B-V DIFFERS FROM THE THAT OF LINEAR
EARLIER VERSIONS OF ENDF/B. BY READING AN EXISTING MF=1, MT=451 LINEAR
IT IS POSSIBLE FOR THIS PROGRAM TO DETERMINE WHICH VERSION OF LINEAR
THE ENDF/B FORMAT THE DATA IS IN. WITHOUT HAVING A SECTION OF LINEAR
MF=1, MT=451 PRESENT IT IS IMPOSSIBLE FOR THIS PROGRAM TO LINEAR
DETERMINE WHICH VERSION OF THE ENDF/B FORMAT THE DATA IS IN, AND LINEAR
AS SUCH IT IS IMPOSSIBLE FOR THE PROGRAM TO DETERMINE WHAT FORMAT LINEAR
SHOULD BE USED TO CREATE A HOLLERITH SECTION. LINEAR
LINEAR
REACTION INDEX LINEAR
-------------- LINEAR
THIS PROGRAM DOES NOT USE THE REACTION INDEX WHICH IS GIVEN IN LINEAR
SECTION MF=1, MT=451 OF EACH EVALUATION. LINEAR
LINEAR
THIS PROGRAM DOES NOT UPDATE THE REACTION INDEX IN MF=1, MT=451. LINEAR
THIS CONVENTION HAS BEEN ADOPTED BECAUSE MOST USERS DO NOT LINEAR
REQUIRE A CORRECT REACTION INDEX FOR THEIR APPLICATIONS AND IT WASLINEAR
NOT CONSIDERED WORTHWHILE TO INCLUDE THE OVERHEAD OF CONSTRUCTING LINEAR
A CORRECT REACTION INDEX IN THIS PROGRAM. HOWEVER, IF YOU REQUIRE LINEAR
A REACTION INDEX FOR YOUR APPLICATIONS, AFTER RUNNING THIS PROGRAMLINEAR
YOU MAY USE PROGRAM DICTIN TO CREATE A CORRECT REACTION INDEX. LINEAR
LINEAR
SECTION SIZE LINEAR
------------ LINEAR
SINCE THIS PROGRAM USES A LOGICAL PAGING SYSTEM THERE IS NO LIMIT LINEAR
TO THE NUMBER OF POINTS IN ANY SECTION, E.G., THE TOTAL CROSS LINEAR
SECTION MAY BE REPRESENTED BY 200,000 DATA POINTS. LINEAR
LINEAR
FOR ANY LINEARIZED SECTION THAT CONTAINS 60000 OR FEWER POINTS LINEAR
THE ENTIRE OPERATION WILL BE PERFORMED IN CORE AND THE LINEARIZED LINEAR
DATA WILL BE OUTPUT DIRECTLY TO THE ENDF/B FORMAT. FOR ANY SECTIONLINEAR
THAT CONTAINS MORE POINTS THE DATA WILL BE LINEARIZED A PAGE AT A LINEAR
TIME (1 PAGE = 60000 POINTS) AND OUTPUT TO SCRATCH. AFTER THE LINEAR
ENTIRE SECTION HAS BEEN LINEARIZED THE DATA WILL BE READ BACK FROMLINEAR
SCRATCH AND OUTPUT TO THE ENDF/B FORMAT. LINEAR
LINEAR
SELECTION OF DATA LINEAR
----------------- LINEAR
THE PROGRAM SELECTS DATA TO BE LINEARIZED BASED EITHER ON EITHER LINEAR
MAT (ENDF/B MAT NO.) OR ZA AS WELL AS MF AND MT NUMBERS. THIS LINEAR
PROGRAM ALLOWS UP TO 100 MAT/MF/MT OR ZA/MF/MT RANGES TO BE LINEAR
SPECIFIED BY INPUT PARAMETERS. THE PROGRAM WILL ASSUME THAT THE LINEAR
ENDF/B TAPE IS IN MAT ORDER, REGARDLESS OF THE CRITERIA USED LINEAR
TO RETRIEVE MATERIALS. IF RETRIEVAL IS BY MAT RANGE THE PROGRAM LINEAR
WILL TERMINATE WHEN A MAT IS FOUND THAT IS ABOVE ALL REQUESTED LINEAR
MAT RANGES. IF RETRIEVAL IS BY ZA RANGE THE PROGRAM WILL SEARCH LINEAR
THE ENTIRE ENDF/B TAPE. LINEAR
LINEAR
PROGRAM OPERATION LINEAR
----------------- LINEAR
EACH SECTION OF DATA IS CONSIDERED SEPARATELY. EACH SECTION OF LINEAR
ENDF/B DATA TO LINEARIZE IS REPRESENTED BY A TABLE OF ENERGY LINEAR
VS. CROSS SECTION AND ANY ONE OF FIVE ALLOWABLE INTERPOLATION LAWSLINEAR
BETWEEN ANY TWO TABULATED POINTS. THIS PROGRAM WILL REPLACE EACH LINEAR
SECTION OF DATA CROSS SECTIONS BY A NEW TABLE OF ENERGY VS. LINEAR
CROSS SECTION IN WHICH THE INTERPOLATION LAW IS ALWAYS LINEAR IN LINEAR
ENERGY AND CROSS SECTION BETWEEN ANY TWO TABULATED POINTS. LINEAR
LINEAR
DATA IS READ AND LINEARIZED A PAGE AT A TIME (ONE PAGE CONTAINS LINEAR
60000 DATA POINTS). IF THE FINAL LINEARIZED SECTION CONTAINS TWO LINEAR
PAGES OR LESS, DATA POINTS IT WILL BE ENTIRELY CORE RESIDENT LINEAR
AFTER IT HAS BEEN LINEARIZED AND WILL BE WRITTEN DIRECTLY FROM LINEAR
CORE TO THE OUTPUT TAPE. IF THE LINEARIZED SECTION IS LARGER THAN LINEAR
TWO PAGES, AFTER EACH PAGE IS LINEARIZED IT WILL BE WRITTEN TO LINEAR
SCRATCH. AFTER THE ENTIRE SECTION HAS BEEN LINEARIZED IT WILL LINEAR
BE READ BACK FROM SCRATCH, TWO PAGES AT A TIME, AND WRITTEN TO LINEAR
THE OUTPUT TAPE. LINEAR
LINEAR
KEEP EVALUATED DATA POINTS LINEAR
-------------------------- LINEAR
SOMETIMES IT IS CONVENIENT TO KEEP ALL ENERGY POINTS WHICH WERE LINEAR
PRESENT IN THE ORIGINAL EVALUATION AND TO MERELY SUPPLEMENT THESE LINEAR
POINTS WITH ADDITIONAL ENERGY POINTS IN ORDER TO LINEARIZE THE LINEAR
CROSS SECTIONS. FOR EXAMPLE, IT IS OFTEN CONVENIENT TO KEEP THE LINEAR
THERMAL VALUE (AT 0.0253 EV) OR THE VALUE AT 14.1 MEV. LINEAR
LINEAR
THE CURRENT VERSION OF THIS PROGRAM WILL ALLOW THE USER TO KEEP LINEAR
ALL ORIGINAL EVALUATED DATA POINTS BY SPECIFYING 1 IN COLUMNS LINEAR
34-44 OF THE FIRST INPUT LINE. THIS WILL TURN OFF THE BACKWARD LINEAR
THINNING (SEE UCRL-50400, VOL. 17, PART A FOR EXPLANATION) AND LINEAR
RESULT IN ALL ORIGINAL ENERGY POINTS BEING KEPT. CAUTION SHOULD LINEAR
BE EXERCISED IN USING THIS OPTION SINCE IT CAN RESULT IN A LINEAR
CONSIDERABLE INCREASE IN THE NUMBER OF DATA POINTS OUTPUT BY LINEAR
THIS CODE. LINEAR
LINEAR
FOR ALL USERS WHO ARE NOT INTERESTED IN THIS OPTIONS NO CHANGES LINEAR
ARE REQUIRED IN THE INPUT TO THIS PROGRAM, I. E. IF COLUMNS LINEAR
34-44 ARE BLANK (AS FOR ALL PREVIOUS VERSIONS OF THIS CODE) THE LINEAR
PROGRAM WILL OPERATE EXACTLY AS IT DID BEFORE. LINEAR
LINEAR
ALLOWABLE ERROR LINEAR
--------------- LINEAR
ALLOWABLE ERROR MUST ALWAYS BE SPECIFIED IN THE INPUT TO THIS LINEAR
PROGRAM AS A FRACTION, NOT A PER-CENT. FOR EXAMPLE, INPUT THE LINEAR
ALLOWABLE FRACTIONAL ERROR 0.001 IN ORDER TO OBTAIN DATA THAT IS LINEAR
ACCURATE TO WITHIN 0.1 PER-CENT. LINEAR
LINEAR
THE CONVERSION OF THE DATA FROM THE GENERAL INTERPOLATION FORM TO LINEAR
LINARLY INTERPOLABLE FORM CANNOT BE PERFORMED EXACTLY. HOWEVER, ITLINEAR
CAN BE PERFORMED TO VIRTUALLY ANY REQUIRED ACCURACY AND MOST LINEAR
IMPORTANTLY CAN BE PERFORMED TO A TOLERANCE THAT IS SMALL COMPAREDLINEAR
TO THE UNCERTAINTY IN THE CROSS SECTIONS THEMSELVES. AS SUCH THE LINEAR
CONVERSION OF CROSS SECTIONS TO LINEARLY INTERPOLABLE FORM CAN BE LINEAR
PERFORMED WITH ESSENTIALLY NO LOSE OF INFORMATION. LINEAR
LINEAR
THE ALLOWABLE ERROR MAY BE ENERGY INDEPENDENT (CONSTANT) OR ENERGYLINEAR
DEPENDENT. THE ALLOWABLE ERROR IS DESCRIBED BY A TABULATED LINEAR
FUNCTION OF UP TO 20 (ENERGY,ERROR) PAIRS AND LINEAR INTERPOLATIONLINEAR
BETWEEN TABULATED POINTS. IF ONLY ONE TABULATED POINT IS GIVEN THELINEAR
ERROR WILL BE CONSIDERED CONSTANT OVER THE ENTIRE ENERGY RANGE. LINEAR
WITH THIS ENERGY DEPENDENT ERROR ONE MAY OPTIMIZE THE OUTPUT FOR LINEAR
ANY GIVEN APPLICATION BY USING A SMALL ERROR IN THE ENERGY RANGE LINEAR
OF INTEREST AND A LESS STRINGENT ERROR IN OTHER ENERGY RANGES. LINEAR
LINEAR
DEFAULT ALLOWABLE ERROR LINEAR
----------------------- LINEAR
IN ORDER TO INSURE CONVERGENCE OF THE LINEARIZING ALGORITHM THE LINEAR
ALLOWABLE ERROR MUST BE POSITIVE. IF THE USER INPUTS AN ERROR LINEAR
THAT IS NOT POSITIVE IT WILL AUTOMATICALLY BE SET TO THE DEFAULT LINEAR
VALUE (CURRENTLY 0.001, CORRESPONDING TO 0.1 PER-CENT) AND LINEAR
INDICATED AS SUCH IN THE OUTPUT LISTING. LINEAR
LINEAR
COULOMB PENETRABILITY (INTERPOLATION LAW = 6) LINEAR
-------------------------------------------- LINEAR
INTRODUCED FOR ENDF/B-VI. THIS IS DEFINED AS, LINEAR
LINEAR
SIG(E) = C1*EXP(-C2/SQRT(E - T)) LINEAR
LINEAR
THIS PROGRAM ONLY CONSIDERS EXOTHERMIC REACTIONS - T = 0 LINEAR
LINEAR
SIG(E) = C1*EXP(-C2/SQRT(E)) LINEAR
LINEAR
WARNING...THIS INTERPOLATION LAW SHOULD ONLY BE USED FOR REACTIONSLINEAR
WHICH HAVE A POSITIVE Q-VALUE (EXOTHERMIC REACTIONS), LINEAR
SINCE HERE WE ONLY CONSIDER T = 0.0 IN THE FORMALISM. LINEAR
IN ALL OTHER CASES A WARNING MESSAGE WILL BE PRINTED. LINEAR
LINEAR
INPUT FILES LINEAR
----------- LINEAR
UNIT DESCRIPTION LINEAR
---- ----------- LINEAR
2 INPUT LINES (BCD - 80 CHARACTERS/RECORD) LINEAR
10 ORIGINAL ENDF/B DATA (BCD - 80 CHARACTERS/RECORD) LINEAR
LINEAR
OUTPUT FILES LINEAR
------------ LINEAR
UNIT DESCRIPTION LINEAR
---- ----------- LINEAR
3 OUTPUT REPORT (BCD - 120 CHARACTERS/RECORD) LINEAR
11 FINAL ENDF/B DATA (BCD - 80 CHARACTERS/RECORD) LINEAR
LINEAR
SCRATCH FILES LINEAR
------------- LINEAR
UNIT DESCRIPTION LINEAR
---- ----------- LINEAR
12 SCRATCH FILE (BINARY - 180000 WORDS/RECORD LINEAR
LINEAR
OPTIONAL STANDARD FILE NAMES (SEE SUBROUTINE FILEIO) LINEAR
---------------------------------------------------- LINEAR
UNIT FILE NAME LINEAR
---- ---------- LINEAR
2 LINEAR.INP LINEAR
3 LINEAR.LST LINEAR
10 ENDFB.IN LINEAR
11 ENDFB.OUT LINEAR
12 (SCRATCH) LINEAR
LINEAR
LINEAR
INPUT PARAMETERS LINEAR
---------------- LINEAR
FOR VERSIONS EARLIER THAN 90-1 THIS PROGRAM ONLY ALLOWED THE USER LINEAR
TO SPECIFY BY INPUT PARAMETERS WHICH MATERIALS (MAT) TO PROCESS. LINEAR
FOR EACH REQUESTED MATERIAL NEUTRON INTERACTION CROSS SECTIONS LINEAR
(MF=3) WOULD BE LINEARIZED AND THE REMAINDER OF THE MATERIAL LINEAR
WOULD BE COPIED. LINEAR
LINEAR
FOR VERSIONS 90-1 AND LATER THIS PROGRAM WILL ALLOW THE USER TO LINEAR
TO SPECIFY BY INPUT PARAMETERS EXACTLY WHAT SECTIONS OF DATA LINEAR
TO PROCESS. FOR EACH SECTION OF DATA, SPECIFIED BY MAT, MF, MT LINEAR
RANGES, SECTIONS OF MF=3, 23 AND 27 WILL BE LINEARIZED AND ALL LINEAR
OTHER REQUESTED SECTIONS WILL BE COPIED. ALL SECTIONS WHICH ARE LINEAR
NOT EXPLICITLY REQUESTED WILL BE SKIPPED AND WILL NOT APPEAR ON LINEAR
ENDF/B FILE OUTPUT BY THIS PROGRAM. LINEAR
LINEAR
WITH THIS NEW PROCEDURE YOU CAN MINIMIZE THE SIZE OF THE ENDF/B LINEAR
FILE OUTPUT BY THIS PROGRAM, E.G., IF YOU ONLY WANT NEUTRON LINEAR
CROSS SECTIONS FOR SUBSEQUENT PROCESSING YOU NEED ONLY REQUEST LINEAR
ONLY MF=3 DATA. LINEAR
LINEAR
HOWEVER, YOU MUST UNDERSTAND THAT ONLY THOSE SECTIONS WHICH YOU LINEAR
EXPLICITLY REQUEST WILL APPEAR ON THE ENDF/B FILE OUTPUT BY LINEAR
THIS PROGRAM. FOR EXAMPLE, IF YOU WISH TO DOCUMENT EXACTLY LINEAR
HOW YOU LINEARIZED THE DATA BY INCLUDING COMMENTS IN MF=1, MT=451 LINEAR
THEN YOU MUST EXPLICITLY REQUEST THAT MF=1, MT=451 BE PROCESSED LINEAR
FOR EACH MATERIAL THAT YOU REQUEST. SIMILAR IF YOU WANT THE LINEAR
ENTIRE EVALUATION YOU MUST REQUEST ALL MF AND MT TO BE OUTPUT. LINEAR
LINEAR
LINE COLS. DESCRIPTION LINEAR
---- ----- ----------- LINEAR
1 1-11 SELECTION CRITERIA (0=MAT, 1=ZA) LINEAR
12-22 MONITOR MODE SELECTOR LINEAR
= 0 - NORMAL OPERATION LINEAR
= 1 - MONITOR PROGRESS OF LINEARIZING OF THE DATA. LINEAR
EACH TIME A PAGE OF DATA POINTS IS WRITTEN TO LINEAR
THE SCRATCH FILE PRINT OUT THE TOTAL NUMBER OF LINEAR
POINTS ON SCRATCH AND THE LOWER AND UPPER LINEAR
ENERGY LIMITS OF THE PAGE (THIS OPTION MAY BE LINEAR
USED IN ORDER TO MONITOR THE EXECUTION SPEED LINEAR
OF LONG RUNNING JOBS). LINEAR
23-33 MINIMUM CROSS SECTION OF INTEREST (BARNS). LINEAR
(IF 0.0 OR LESS IS INPUT THE PROGRAM WILL LINEAR
USE 1.0E-10). ENERGY INTERVALS WILL NOT BE LINEAR
SUB-DIVIDED IF THE ABSOLUTE VALUE OF THE CROSS LINEAR
SECTION WITHIN THE INTERVAL IS LESS THAN THIS VALUE. LINEAR
AN EXCEPTION TO THIS RULE IS NEAR THRESHOLDS ENERGY LINEAR
INTERVALS WILL BE SUB-DIVIDED UNTIL CONVERGENCE LINEAR
REGARDLESS OF THE MAGNITUDE OF THE CROSS SECTION. LINEAR
34-44 KEEP ORIGINAL EVALUATED DATA POINTS. LINEAR
= 0 - NO. LINEAR
= 1 - YES - ADDITIONAL POINTS MAY BE ADDED IN ORDER LINEAR
TO LINEARIZE DATA, BUT ALL ORIGINAL LINEAR
DATA POINTS WILL BE INCLUDED IN THE LINEAR
RESULTS. LINEAR
2 1-72 ENDF/B INPUT DATA FILENAME LINEAR
(STANDARD OPTION = ENDFB.IN) LINEAR
3 1-72 ENDF/B OUTPUT DATA FILENAME LINEAR
(STANDARD OPTION = ENDFB.OUT) LINEAR
4-N 1- 6 LOWER MAT OR ZA LIMIT LINEAR
7- 8 LOWER MF LIMIT LINEAR
9-11 LOWER MT LIMIT LINEAR
12-17 UPPER MAT OR ZA LIMIT LINEAR
18-19 UPPER MF LIMIT LINEAR
20-22 UPPER MT LIMIT LINEAR
UP TO 100 RANGES MAY BE SPECIFIED, ONLY ONE RANGE LINEAR
PER LINE. THE LIST OF RANGES IS TERMINATED BY A LINEAR
BLANK LINE. IF THE UPPER MAT LIMIT OF ANY REQUEST LINEAR
IS LESS THAN THE LOW LIMIT IT WILL BE SET EQUAL TO LINEAR
THE LOWER LIMIT. IF THE UPPER LIMIT IS STILL ZERO LINEAR
IT WILL BE SET EQUAL TO 999999. IF THE UPPER MF OR LINEAR
MT LIMIT IS ZERO IT WILL BE SET TO 99 OR 999 LINEAR
RESPECTIVELY. LINEAR
VARY 1-11 ENERGY FOR ERROR LAW LINEAR
12-22 ALLOWABLE FRACTIONAL ERROR FOR ERROR LAW. LINEAR
THE ACCEPTABLE LINEARIZING ERROR MAY BE SPECIFIED TO LINEAR
BE EITHER ENERGY INDEPENDENT (DEFINED BY A SINGLE LINEAR
ERROR), OR ENERGY DEPENDENT (DEFINED BY UP TO 20 LINEAR
ENERGY, ERROR PAIRS). FOR THE ENERGY DEPENDENT CASE LINEAR
LINEAR INTERPOLATION WILL BE USED TO DEFINE THE ERRORLINEAR
AT ENERGIES BETWEEN THOSE AT WHICH IT IS TABULATED. LINEAR
IN ALL CASES THE ERROR LAW IS TERMINATED BY A BLANK LINEAR
LINE. IF ONLY ONE ENERGY, ERROR PAIR IS GIVEN THE LINEAR
THE LAW WILL BE CONSIDERED TO BE ENERGY INDEPENDENT. LINEAR
IF MORE THAN ONE PAIR IS GIVEN IT WILL BE CONSIDERED LINEAR
TO BE ENERGY DEPENDENT (NOTE, ENERGY INDEPENDENT LINEAR
FORM WILL RUN FASTER THAN THE EQUIVALENT ENERGY LINEAR
DEPENDENT FORM). FOR AN ENERGY DEPENDENT ERROR LAW LINEAR
ALL ENERGIES MUST BE ASCENDING ENERGY ORDER. FOR LINEAR
CONVERGENCE OF THE LINEARIZING ALGORITHM ALL ERRORS LINEAR
MUST BE POSITIVE. IF AN ALLOWABLE ERROR IS NOT LINEAR
POSITIVE IT WILL BE SET EQUAL TO THE STANDARD OPTION LINEAR
(CURRENTLY 0.001, CORRESPONDING TO 0.1 PER-CENT). LINEAR
IF THE FIRST ERROR LINE IS BLANK IT WILL TERMINATE LINEAR
THE ERROR LAW AND THE ERROR WILL BE TREATED AS LINEAR
ENERGY INDEPENDENT, EQUAL TO THE STANDARD OPTION LINEAR
(CURRENTLY 0.1 PER-CENT). (SEE EXAMPLE INPUT 4). LINEAR
LINEAR
EXAMPLE INPUT NO. 1 LINEAR
------------------- LINEAR
RETRIEVE DATA BY ZA IN ORDER TO FIND ALL URANIUM ISOTOPES AND LINEAR
THORIUM 232. RETRIEVE ALL NEUTRON INTERACTION CROSS SECTIONS LINEAR
(MF=3). ALL ENERGY INTERVALS IN WHICH THE CROSS SECTION IS LINEAR
AT LEAST 1 MICRO-BARN (1.0E-06 BARNS) WILL BE SUBDIVIDED. LINEAR
BACKWARD THINNING WILL BE PERFORMED. FROM 0 TO 100 EV LINEARIZE LINEAR
TO WITHIN 0.1 PER-CENT ACCURACY. FROM 100 EV TO 1 KEV VARY LINEAR
ACCURACY BETWEEN 0.1 AND 1.0 PER-CENT. ABOVE 1 KEV USE 1 LINEAR
PER-CENT ACCURACY. LINEAR
LINEAR
EXPLICITLY SPECIFY THE STANDARD FILENAMES. LINEAR
LINEAR
IN THIS CASE THE FOLLOWING 11 INPUT LINES ARE REQUIRED LINEAR
LINEAR
1 0 1.00000- 6 0 LINEAR
ENDFB.IN LINEAR
ENDFB.OUT LINEAR
92000 3 0 92999 3999 LINEAR
90232 3 0 0 3 0 (UPPER LIMIT AUTOMATICALLY SET TO 90232 3999)LINEAR
(END OF REQUEST LIST) LINEAR
0.00000+ 0 1.00000-03 LINEAR
1.00000+ 2 1.00000-03 LINEAR
1.00000+ 3 1.00000-02 LINEAR
1.00000+ 9 1.00000-02 LINEAR
(END OF ERROR LAW) LINEAR
LINEAR
EXAMPLE INPUT NO. 2 LINEAR
------------------- LINEAR
SAME AS THE ABOVE CASE, EXCEPT LINEARIZE ALL DATA TO WITHIN THE LINEAR
STANDARD ACCURACY (CURRENTLY 0.1 PER-CENT). IN ORDER TO USE THE LINEAR
STANDARD ACCURACY YOU NEED NOT SPECIFY ANY ERROR LAW AT ALL. IN LINEAR
THIS CASE INCLUDE THE HOLLERITH SECTION, MF=1, MT=451, FOR EACH LINEAR
MATERIAL. LINEAR
LINEAR
LEAVE THE DEFINITION OF THE FILENAMES BLANK - THE PROGRAM WILL LINEAR
THEN USE STANDARD FILENAMES. LINEAR
LINEAR
IN THIS CASE THE FOLLOWING 9 INPUT LINES ARE REQUIRED LINEAR
LINEAR
1 0 1.00000- 6 0 LINEAR
(USE DEFAULT FILENAME = ENDFB.IN) LINEAR
(USE DEFAULT FILENAME = ENDFB.OUT) LINEAR
92000 1451 92999 1451 LINEAR
92000 3 0 92999 3999 LINEAR
90232 1451 0 1451 LINEAR
90232 3 0 0 3 0 (UPPER LIMIT AUTOMATICALLY SET TO 90232 3999)LINEAR
(END OF REQUEST LIST) LINEAR
(0.1 PER-CENT ERROR, END OF ERROR LAW) LINEAR
LINEAR
EXAMPLE INPUT NO. 3 LINEAR
------------------- LINEAR
LINEARIZE ALL MATERIALS ON AN ENDF/B TAPE TO WITHIN AN ACCURACY LINEAR
OF 0.5 PER-CENT (0.005 AS A FRACTION). IN THIS CASE YOU NEED NOT LINEAR
SPECIFY THE MAT, MF, MT RANGES. LINEAR
LINEAR
READ THE ENDF/B DATA FROM \ENDFB6\ZA092238 AND WRITE THE ENDF/B LINEAR
DATA TO \ENDFB6\LINEAR\ZA092238. LINEAR
LINEAR
IN THIS CASE THE FOLLOWING 6 INPUT LINES ARE REQUIRED LINEAR
LINEAR
(MAT, 1.0E-10 BARNS, THIN)LINEAR
\ENDFB6\ZA092238 LINEAR
\ENDFB6\LINEAR\ZA092238 LINEAR
(RETRIEVE ALL DATA, END REQUEST LIST) LINEAR
5.00000-03 LINEAR
(END OF ERROR LAW) LINEAR
LINEAR
NOTE THAT IN THIS CASE IF THE INPUT HAD SPECIFIED AN EQUIVALENT LINEAR
ENERGY DEPENDENT ERROR LAW BY GIVING A NUMBER OF ENERGY POINTS LINEAR
AT EACH OF WHICH THE ERROR IS 0.5 PER-CENT THE PROGRAM WOULD TAKE LINEAR
LONGER TO RUN (I.E., ONLY USE AN ENERGY DEPENDENT ERROR LAW WHEN LINEAR
IT IS NECESSARY). LINEAR
LINEAR
EXAMPLE INPUT NO. 4 LINEAR
------------------- LINEAR
IN ORDER TO LINEARIZE ALL MATERIALS ON AN ENDF/B TAPE TO THE LINEAR
STANDARD OPTION OF 0.1 PER-CENT IT IS ADEQUATE TO INPUT A SET LINEAR
OF COMPLETELY BLANK LINES WHICH WILL AUTOMATICALLY INVOKE ALL LINEAR
OF THE STANDARD OPTIONS. LINEAR
LINEAR
LEAVE THE DEFINITION OF THE FILENAMES BLANK - THE PROGRAM WILL LINEAR
THEN USE STANDARD FILENAMES. LINEAR
LINEAR
IN THIS CASE THE FOLLOWING THREE INPUT LINES ARE REQUIRED LINEAR
LINEAR
(MAT, 1.0E-10 BARNS, THIN)LINEAR
(USE DEFAULT FILENAME = ENDFB.IN) LINEAR
(USE DEFAULT FILENAME = ENDFB.OUT) LINEAR
(RETRIEVE ALL DATA, END REQUEST LIST) LINEAR
(0.1 PER-CENT ERROR, END OF ERROR LAW) LINEAR
LINEAR
=======================================================================LINEAR